so i just got an 87 fc tii...some questions
i got the car today with 75,000 miles on it. the previous owner did supporting mods like
ported wastegate and turbo runners to prevent boost creep, FCD installed to prevent fuel-cut New gauge pods installed with boost, a/f mixture, and water temperature New Greddy 720cc secondary injectors New ACT clutch, pressure plate, and lightweight flywheel New Walbro 255 fuel pump, rewired to a reliable circuit to prevent running lean New shifter bushings right now the car is running at 7 psi...and to get it up to about 11 psi he suggested an Rtek 2.0 and MBC...i'm brand new to the rx-7 world and i was wondering where i could purchase an rtek 2.0..and waht exactly it is.... im going to be getting a manual boost controller later this week...can u guys recommend a brand? and should i install both the mbc and the rtek 2.0 at the same time? |
off topic but check this out....
https://www.rx7club.com/west-rx-7-forum-193/april-norcal-bay-area-meet-info-515066/ |
awesome...is there any like seperate nor cal/bay area rx-7 club with chill people..or is it all on these boards
|
rtek is more advanced people. i would suggest you take it to get tuned by a profecinal or somthing. rtek is a chip that goes into your stock ECU. if you do a search you will find a link to there web site. its basicly like running stand alone but not. you get the chip and then this enables you to connect a palm pilot to your ecu for tunning
|
also, check out www.barotary.com
We're all chill people....we have meets once a month in various locations. Keep an eye out in the west forum for meet information and shit. It would be good to have another member chill with us! |
Originally Posted by 1SxyRXy
rtek is more advanced people. i would suggest you take it to get tuned by a profecinal or somthing. rtek is a chip that goes into your stock ECU. if you do a search you will find a link to there web site. its basicly like running stand alone but not. you get the chip and then this enables you to connect a palm pilot to your ecu for tunning
|
thanks alot for the help guys...so you recommend going to a shop for this? you guys know any shops that would have rtek 2 in the bay...or would i have to order it offline and then have a shop install it for me?
|
you'd have to order it. when you order, you send your ECU in and they modify it themselves....you then get it back and install the ECU.
|
haha thanks. i feel pretty ignorant about all this stuff =/
|
Originally Posted by OaklandTII
i got the car today with 75,000 miles on it. the previous owner did supporting mods like
ported wastegate and turbo runners to prevent boost creep, FCD installed to prevent fuel-cut New gauge pods installed with boost, a/f mixture, and water temperature New Greddy 720cc secondary injectors New ACT clutch, pressure plate, and lightweight flywheel New Walbro 255 fuel pump, rewired to a reliable circuit to prevent running lean New shifter bushings right now the car is running at 7 psi...and to get it up to about 11 psi he suggested an Rtek 2.0 and MBC...i'm brand new to the rx-7 world and i was wondering where i could purchase an rtek 2.0..and waht exactly it is.... im going to be getting a manual boost controller later this week...can u guys recommend a brand? and should i install both the mbc and the rtek 2.0 at the same time? |
damn rtek 2.0 needs to be made for the s5 TOO! It sucks. :(
|
Originally Posted by FuStEr
Did u get it off a guy name David from fremont?
|
Originally Posted by OaklandTII
yeah i did..how do you know him. good or bad reputation? :X
|
All times are GMT -5. The time now is 01:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands