so i cracked my water pump housing on my TII
#1
Rotary
Thread Starter
so i cracked my water pump housing on my TII
well i cracked my water pump housing and now i need to gte another one, but here is my question, are s4Tii and s5Tii water pump housing the same or different? please let me know bc im about to buy a housing and need to know..thanks once again
#5
Rotary
Thread Starter
#6
Rotary Freak
iTrader: (1)
They differ in the thermo neck, since the S4's are metal and have a different bolt pattern than the plastic S5's. If you have the front cover off of an S4 (thus the mechanical OMP), you probably had an S4 water pump on there, altho i think (but am in no way certain) that the themostat neck is the only difference between S4 and S5 water pumps. Which do you have on there now?
Edit: I believe that the S4's also needed a spacer between the water pump and the engine, whereas the S5's didnt. however, IIRC the mounting stud pattern is the same.
Edit: I believe that the S4's also needed a spacer between the water pump and the engine, whereas the S5's didnt. however, IIRC the mounting stud pattern is the same.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM