smoke, overheat, blah, blah
smoke, overheat, blah, blah
So I just recently bought an '88 se just to nab a bumper cover and fender off and maybe some other cosmetic things before I unload it.
The car has 138k miles on it, smokes white when it is turned on and continues a light smoke afterwards. After a few minutes it overheats and won't idle. All tell-tale signs of a rebuild. Only thing is the coolant seems fine-- there's quite a bit in the overflow--, and the oil seems fine (actually not sure about the oil-- will have to check again).
Basically I want to know before I part it out if the car may have some things that may be causing the issue that isn't a blown engine.
The car has 138k miles on it, smokes white when it is turned on and continues a light smoke afterwards. After a few minutes it overheats and won't idle. All tell-tale signs of a rebuild. Only thing is the coolant seems fine-- there's quite a bit in the overflow--, and the oil seems fine (actually not sure about the oil-- will have to check again).
Basically I want to know before I part it out if the car may have some things that may be causing the issue that isn't a blown engine.
Originally Posted by joe_afternoon
Yeah? What will that tell me?
Maybe do the "block weld" trick - it might work if it's not too late.
Thread
Thread Starter
Forum
Replies
Last Post
ls1swap
3rd Generation Specific (1993-2002)
17
Jun 3, 2024 03:25 PM
frosty1993
General Rotary Tech Support
3
Sep 30, 2015 01:27 PM



