2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

shifter noise

Thread Tools
 
Search this Thread
 
Old May 18, 2008 | 07:45 PM
  #1  
likeapooch's Avatar
Thread Starter
(>'-')>
 
Joined: May 2008
Posts: 204
Likes: 0
From: Detroit Michigan
shifter noise

when i drive the area where the shifter is gives out a screaching sound as i accel. i thought it was cuz my bushings were gone but i replaced them and it still makes the sound. is this normal and is there a way to silence it?
Reply
Old May 18, 2008 | 09:22 PM
  #2  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
I would check the Fluid level in your Transmission.Also when you Changed the bushings,did you add some Fluid to the Upper shifter Housing?..(take a look at www.mazdatrix.com..look up short throw shifter for an FC..they have a Video of the guy putting some fluid in the shifter Bushing area).
Reply
Old May 18, 2008 | 09:45 PM
  #3  
Andrizzanizz's Avatar
Rotary Freak
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jun 2007
Posts: 1,554
Likes: 0
From: Charleston, SC
is the screeching kind of like a whinning also?
Reply
Old May 19, 2008 | 10:56 AM
  #4  
likeapooch's Avatar
Thread Starter
(>'-')>
 
Joined: May 2008
Posts: 204
Likes: 0
From: Detroit Michigan
yeah u could say its whining
Reply
Old May 19, 2008 | 11:12 AM
  #5  
farberio's Avatar
NASA-MW ST4
Tenured Member: 20 Years
iTrader: (7)
 
Joined: Dec 2004
Posts: 3,800
Likes: 3
From: Norcal, Bay Area
Originally Posted by misterstyx69
I would check the Fluid level in your Transmission.Also when you Changed the bushings,did you add some Fluid to the Upper shifter Housing?..(take a look at www.mazdatrix.com..look up short throw shifter for an FC..they have a Video of the guy putting some fluid in the shifter Bushing area).
+1
Reply
Old May 19, 2008 | 11:15 AM
  #6  
1revin712488's Avatar
Red Rotary Rocket
 
Joined: Nov 2007
Posts: 237
Likes: 0
From: Syracuse NY
what kind of fluid is that?
Reply
Old May 19, 2008 | 08:13 PM
  #7  
mike_merryguy's Avatar
suck me beautiful
Tenured Member 05 Years
iTrader: (8)
 
Joined: Jul 2007
Posts: 1,243
Likes: 0
From: San Clemente
After cleaning the shifter hole, this is a good time to put the oil in the shift tower. We use 90W trans/diff oil. Fill to around middle of shift rod.
from mazdatrix.com

side note, mine makes whinning noises too, i just figure its the gear ratio or whatever, does it on decel more though
Reply
Old May 19, 2008 | 10:23 PM
  #8  
lord wither's Avatar
Junior Member
 
Joined: May 2008
Posts: 21
Likes: 0
From: Seattle, Wa
I've noticed that mine whines also. From reading this I will definately check my fluid lvls.
Reply




All times are GMT -5. The time now is 06:42 PM.