2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Screw size for the lower steering column

Thread Tools
 
Search this Thread
 
Old Oct 18, 2020 | 08:18 AM
  #1  
PrestonZX's Avatar
Thread Starter
Newbie
 
Joined: Oct 2020
Posts: 4
Likes: 0
From: Oklahoma
Screw size for the lower steering column

Does anyone know where I can get screws for an '89 vert lower steering column housing? I got the car several months back and the owner had removed and lost all the screws. Thanks!
Reply
Old Oct 23, 2020 | 10:18 AM
  #2  
JerryLH3's Avatar
Rabbit hole specialist
Tenured Member: 25 Years
Community Favorite
iTrader: (11)
 
Joined: Feb 2001
Posts: 2,852
Likes: 225
From: Tampa, FL
Three of them are tapping screws. Two go into the turn signal cancel switch, and one goes to the upper column cover. There is one threaded screw, but I would need to remove mine to measure. Pretty sure that threads into the ignition switch, so you may be able to check yourself if yours is exposed.
Reply
Old Oct 23, 2020 | 12:58 PM
  #3  
PrestonZX's Avatar
Thread Starter
Newbie
 
Joined: Oct 2020
Posts: 4
Likes: 0
From: Oklahoma
Originally Posted by JerryLH3
Three of them are tapping screws. Two go into the turn signal cancel switch, and one goes to the upper column cover. There is one threaded screw, but I would need to remove mine to measure. Pretty sure that threads into the ignition switch, so you may be able to check yourself if yours is exposed.
Appreciate the intel. I will look into this. Thank you!
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
sa224life
1st Generation Specific (1979-1985)
5
Jul 28, 2008 06:38 AM
rx7 freak
1st Generation Specific (1979-1985)
6
Jun 9, 2007 09:09 PM




All times are GMT -5. The time now is 09:46 AM.