S5 TURBO II Front Lip Repair?
11-06-05, 07:28 PM
#1
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Midwest
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
S5 TURBO II Front Lip Repair?
Hello, Im trying to figure out how to fix my front lip. It has a couple cracks in it. what would be the best to hold the pieces back together?
OR, does anyone here have a S5 TII lip for sale that is in good shape without cracks? Thanks
OR, does anyone here have a S5 TII lip for sale that is in good shape without cracks? Thanks
11-06-05, 07:32 PM
#4
Retired Moderator, RIP
iTrader: (142)
Join Date: Sep 2005
Location: Smiths Falls.(near Ottawa!.Mapquest IT!)
Posts: 25,581
Likes: 0
Received 131 Likes
on
114 Posts
only thing i can think of that will hold is thin steel and rivets ..it will look like **** but it will hold...epoxy won't due it..the epoxy will crack..i noticed mine was done and it broke in the same place..IMO..get a used one ..good luck
11-06-05, 07:36 PM
#5
Boost in..Apex seals out.
Join Date: Nov 2003
Location: Maryland, 21794
Posts: 1,931
Likes: 0
Received 0 Likes
on
0 Posts
Hey, you're that retard from the SSAC thread! Well done!
If you want to find people selling things, go to the FOR SALE => PARTS section. It seems you have a knack for going to the wrong sections, doesn't it?
BTW, before the thread got closed by dDuB..I was going to say. You need to NOT cuss at the most knowledgeable people on this forum. They can HELP YOU to not make stupid decisions, and perhaps help you control you're rage towards anyone smarter than you. Ta-ta!
If you want to find people selling things, go to the FOR SALE => PARTS section. It seems you have a knack for going to the wrong sections, doesn't it?
BTW, before the thread got closed by dDuB..I was going to say. You need to NOT cuss at the most knowledgeable people on this forum. They can HELP YOU to not make stupid decisions, and perhaps help you control you're rage towards anyone smarter than you. Ta-ta!
11-06-05, 07:50 PM
#6
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Midwest
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
Here are some pics. Its a pretty bad crack, and the previous owner tried to rivit it back together... Anyhow, fiberglass dries kinda slow and I have no way of holding the pieces together for that long. Can i use 5 minute epoxy to hold the pieces where i want them, and then fiberglass them?
11-06-05, 07:53 PM
#7
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Midwest
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by adrock3217
Hey, you're that retard from the SSAC thread! Well done!
If you want to find people selling things, go to the FOR SALE => PARTS section. It seems you have a knack for going to the wrong sections, doesn't it?
BTW, before the thread got closed by dDuB..I was going to say. You need to NOT cuss at the most knowledgeable people on this forum. They can HELP YOU to not make stupid decisions, and perhaps help you control you're rage towards anyone smarter than you. Ta-ta!
If you want to find people selling things, go to the FOR SALE => PARTS section. It seems you have a knack for going to the wrong sections, doesn't it?
BTW, before the thread got closed by dDuB..I was going to say. You need to NOT cuss at the most knowledgeable people on this forum. They can HELP YOU to not make stupid decisions, and perhaps help you control you're rage towards anyone smarter than you. Ta-ta!
Adrock, nobody asked you to post here. If you dont like me, leave this thread alone. And i did post a WTB for this part. I just figured I would check here too.
Trending Topics
11-08-05, 08:43 AM
#8
Senior Member
Thread Starter
Join Date: Aug 2005
Location: Midwest
Posts: 555
Likes: 0
Received 0 Likes
on
0 Posts
Ok, I think I got it all fixed up. A buddy showed me how to use fleece, a stereo backstrap, and fiberglass resin to get it all fixed. Just need to do some sanding today and primer... Then were gonna paint it this afternoon. Hopefully it looks good!! Thanks for the help
Thread
Thread Starter
Forum
Replies
Last Post
