S5 rebuild question
#1
Junior Member
Thread Starter
Join Date: Sep 2007
Location: Charlotte, North Carolina
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
S5 rebuild question
Hey, one quick question.
The metal piece in the 13B exhaust ports nicknamed the "airplane." I was wondering if you can remove it, because i know its only there to quiet the exhaust and i also know its fairly restrictive.
If it can be removed, how would i go about doing such a feat?
The metal piece in the 13B exhaust ports nicknamed the "airplane." I was wondering if you can remove it, because i know its only there to quiet the exhaust and i also know its fairly restrictive.
If it can be removed, how would i go about doing such a feat?
#2
Senior Member
iTrader: (1)
Try searching after accessing the CP - control panel & changing the posts shown to all instead of the last few months... you then have access to ALL of the posts instead of just the last few months. & use the advanced search functions to narrow the search to 2nd generation instead of all of the available forums. the search function can be your friend if used correctly.
Ramses666
Ramses666
#4
Engine, Not Motor
iTrader: (1)
Join Date: Feb 2001
Location: London, Ontario, Canada
Posts: 29,789
Likes: 0
Received 109 Likes
on
92 Posts
It's not restrictive.
It can be ground out with a die grinder and stone, or cut out with a torch/plasma cutter. Or you can replace the sleeves with TII exhaust sleeves.
This will increase sound volume significantly.
It can be ground out with a die grinder and stone, or cut out with a torch/plasma cutter. Or you can replace the sleeves with TII exhaust sleeves.
This will increase sound volume significantly.
Thread
Thread Starter
Forum
Replies
Last Post
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM