S5 OMP removal - (searchable thread)
#1
Coming to an AutoX near U
Thread Starter
Join Date: Jun 2003
Location: Port Huron, Mi
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
S5 OMP removal - (searchable thread)
After 2 weeks of researching OMP removal for my s5, I only found one (somewhat) useful thread on the "other" forum.
I decided to just do it this weekend, so I could safely run synthetics.
So my solution to prevent ECU limp mode was to leave the OMP harness connectors connected and just tie the pump out of the way.
That should hold until I get my haltech.
Also, I used the "2 dimes" method to keep the shaft from moving.
Anybody have better ideas for these 2 topics that they'd like to share?
P.S. I wanted to create this thread to have all the logical terms that would make it show up in a search (ie s5 doesn't work cause search terms have to be 3 chars long, so lets put the word series5 in this thread.)
other terms to help search:
MOP
blockoff
premix
I decided to just do it this weekend, so I could safely run synthetics.
So my solution to prevent ECU limp mode was to leave the OMP harness connectors connected and just tie the pump out of the way.
That should hold until I get my haltech.
Also, I used the "2 dimes" method to keep the shaft from moving.
Anybody have better ideas for these 2 topics that they'd like to share?
P.S. I wanted to create this thread to have all the logical terms that would make it show up in a search (ie s5 doesn't work cause search terms have to be 3 chars long, so lets put the word series5 in this thread.)
other terms to help search:
MOP
blockoff
premix
#3
Senior Member
Join Date: Sep 2003
Location: Fort Worth, TX
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
#4
kill it with BOOMSTICK!
Stacher, do you have a S5 or S4, because I am interested in what you did with your OMP to prevent the computer from going into limp-in mode. I am leaning toward a nifty little thing that plugs into the line that is a resistor that matches the resitance of the OMP and will prevent this problem.
#5
just dont care.
iTrader: (6)
i just took the whole OMP unit off of the block, left it plugged in and tied it down and it works great.
i found that if you seperate the two parts (position sensor and pump) the ECU will go into limpmode anyways (i guess this is where to do the dime stuff to keep the shaft from moving?)
i found that if you seperate the two parts (position sensor and pump) the ECU will go into limpmode anyways (i guess this is where to do the dime stuff to keep the shaft from moving?)
#6
Coming to an AutoX near U
Thread Starter
Join Date: Jun 2003
Location: Port Huron, Mi
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by stacher
This is what I did to blockoff my OMP
http://img78.photobucket.com/albums/...tacher/omp.jpg
This is what I did to blockoff my OMP
http://img78.photobucket.com/albums/...tacher/omp.jpg
It seems that the pump would get over worked cause it's trying to pump oil into blockoff bolts.
Just a hunch.
I may try that if you're pretty sure it works....
mine is just bolted to the shock tower right now, with a blockoff plate in it's original position.
Trending Topics
#12
Coming to an AutoX near U
Thread Starter
Join Date: Jun 2003
Location: Port Huron, Mi
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
reTED said he believes, that k2rd went part time due to some other important problems...
I'd like to know what kevin does with s5's when preparing for premix.... he's a clever fellow.
I'd like to know what kevin does with s5's when preparing for premix.... he's a clever fellow.
#14
Senior Member
Join Date: Sep 2003
Location: Fort Worth, TX
Posts: 414
Likes: 0
Received 0 Likes
on
0 Posts
Stacher, do you have a S5 or S4, because I am interested in what you did with your OMP to prevent the computer from going into limp-in mode.
wouldn't that burn up the pump?
It seems that the pump would get over worked cause it's trying to pump oil into blockoff bolts.
It seems that the pump would get over worked cause it's trying to pump oil into blockoff bolts.
#15
Coming to an AutoX near U
Thread Starter
Join Date: Jun 2003
Location: Port Huron, Mi
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by jacobcartmill
clever enough to put 20's on a ****** pickup truck
also, i bought my k2rd blockoff plates like 3 weeks ago so the site hasnt been down since the beginning of the year.
clever enough to put 20's on a ****** pickup truck
also, i bought my k2rd blockoff plates like 3 weeks ago so the site hasnt been down since the beginning of the year.
Who wouldn't pimp a pickup truck?
#16
Coming to an AutoX near U
Thread Starter
Join Date: Jun 2003
Location: Port Huron, Mi
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by stacher
Well, I really don't know. It has been hooked up since April and no problems yet,
Well, I really don't know. It has been hooked up since April and no problems yet,
#17
Coming to an AutoX near U
Thread Starter
Join Date: Jun 2003
Location: Port Huron, Mi
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
I think I read somewhere that you could disassemble the pump so it wasn't so bulky....
Either way, this is just a temporary fix until I get my haltech.
Anyone use the "2 dimes" method per reTED's site, or no?
Either way, this is just a temporary fix until I get my haltech.
Anyone use the "2 dimes" method per reTED's site, or no?
#18
You've Been Punk'd
Join Date: Jun 2002
Location: Branson, Missouri
Posts: 4,727
Likes: 0
Received 0 Likes
on
0 Posts
are you looking for the size of bolts? because they are 10x1.25 and either 18 or 20 mm long. the ones that go in the housings will have to either be cut off and grinded down or find some short *** bolts (i coudnt find any shorter) good luck.
#19
i am legendary
Join Date: Sep 2003
Location: Kirkland, WA
Posts: 8,478
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by stacher
This is what I did to blockoff my OMP
http://img78.photobucket.com/albums/...tacher/omp.jpg
This is what I did to blockoff my OMP
http://img78.photobucket.com/albums/...tacher/omp.jpg
I've seen more than a few people do it this way, seems like it works, I've never heard of anyone having problems doing it like that.
#20
You've Been Punk'd
Join Date: Jun 2002
Location: Branson, Missouri
Posts: 4,727
Likes: 0
Received 0 Likes
on
0 Posts
i have to make my own or have one machined out of aluminum at the local machine shop. if there are interested people i may be able to get a couple done and you pay me for them and ill sent them to you. they wouldnt be much. i can get 12x12 sheet of 1/8 inch aluminun for 18$. plus milling costs. not sure on those. but will see.
#22
www.v8less.com
Join Date: Nov 2002
Location: Edmonton, Canada
Posts: 568
Likes: 0
Received 0 Likes
on
0 Posts
I think if you're planning on blocking the EOMP you should wait for the haltech
that way it'll just be a non-functioning unit
no problems with removing it then
that way it'll just be a non-functioning unit
no problems with removing it then
#23
Coming to an AutoX near U
Thread Starter
Join Date: Jun 2003
Location: Port Huron, Mi
Posts: 199
Likes: 0
Received 0 Likes
on
0 Posts
Yeah, but I want to start synthetics (other than royal purple) and I'm already premixing for long term benefits, so I wanted to get rid of the OMP ASAP
#24
no clever remarks...
Join Date: Dec 2004
Location: WA State
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
I was thinking... The electric OMP determines how much oil to inject by throttle position right? Would it be possible to probe the OMP harness on a working S5 electric pump to see what the voltage is at the connectors. According to the following diagram the electric omp gets its signal of how much oil to pump from the throttle position sensor. If you wired the appropriate wires to the corresponding wires on the throttle position sensor you could by-pass the pump without having it connected.
http://photobucket.com/albums/a47/S5...urboECUOne.jpg
http://photobucket.com/albums/a47/S5...urboECUTwo.jpg
http://photobucket.com/albums/a47/S5...urboECUOne.jpg
http://photobucket.com/albums/a47/S5...urboECUTwo.jpg
#25
Banned. I got OWNED!!!
Join Date: May 2004
Location: San Antonio
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
has anyone come up with a resistor plug/ harness trick to get this to work? currently i do not have a running S5 in my possession to figure it out.... SOMBODY needs to come up with this!