RTek, anyone having any problems with theirs?
#4
i'm disrespectful to dirt
mine works fine but i do get a hesitation around the new lower secondary staging point at times. when i'm wot the secondaries come on fine. but when i'm cruising around 3400 to 3500 my car stumbles sometimes. 720s are brand new and i'm going to clean the primaries to see if it makes a difference.
Trending Topics
#13
spending too much money..
iTrader: (2)
sounds like you need to do some reading up on the chip go here www.pocketlogger.com and yes the 1.7 chip is made for the 550 and 720 combo
#15
Eat, sleep, work, mod.
Join Date: Jun 2001
Location: Long Island
Posts: 2,517
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by my-sons rx7
Sorry misspoked do you have to run stock primaries 550cc and 720cc secondary or can you run all 720cc or bigger in both. Thanks Tony
That isn't too hard, is it?
#16
Senior Member
Join Date: Aug 2004
Location: Albuquerque, New Mexico
Posts: 504
Likes: 0
Received 0 Likes
on
0 Posts
Rtek 1.7
After my 1.7 chip was installed, I had all kinds of problems with idle and surging. Ran way too rich. After asking for and following advice from fellow forum members, I grounded and grounded. Still had an idling problem. Found a cracked turbo snorkle. Got if fixed. Car runs better than ever. I am extremely pleased with the product.
#17
Senior Member
Join Date: Sep 2003
Location: Syracuse New York
Posts: 423
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by jon88se
As suggested, go to www.pocketlogger.com and READ the info about their ECU upgrades...
That isn't too hard, is it?
That isn't too hard, is it?
Thread
Thread Starter
Forum
Replies
Last Post