Replacing all the vacuum lines, my attempt at doing things the right way.
02-22-11, 03:50 PM
#1
Resident Rotard
Thread Starter
Join Date: May 2009
Location: Belleville, Illinois
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
Replacing all the vacuum lines, my attempt at doing things the right way.
I just bought close to 70 foot of various sizes of fuel lines/vac hoses.
I'm not going silicone, it is just the rubber hoses that I will be using.
http://fc3spro.com/TECH/PROBLEMS/EM/vhoses.htm
I am using this as a guide to how much hose I needed to buy and I am a curious as to if they didn't include the BAC valve lines as well as the coolant line from the rear housing to the throttle body?
That was a question, if anybody knows I'd greatly appreciate it.
I'm not going silicone, it is just the rubber hoses that I will be using.
http://fc3spro.com/TECH/PROBLEMS/EM/vhoses.htm
I am using this as a guide to how much hose I needed to buy and I am a curious as to if they didn't include the BAC valve lines as well as the coolant line from the rear housing to the throttle body?
That was a question, if anybody knows I'd greatly appreciate it.
02-22-11, 05:10 PM
#3
Resident Rotard
Thread Starter
Join Date: May 2009
Location: Belleville, Illinois
Posts: 908
Likes: 0
Received 0 Likes
on
0 Posts
My pass. heater hose failed; noticed when filling my antifreeze up right before the first start of my used engine.
I was extremely disappointed and chucked a screwdriver at my fc, but maybe it is for the best.
I half-assed the vac lines... now I'll do them right.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM