86fc3sred

iTrader: (1)

Replaced my tii motor with a jspec one removed all the emissions and rats nest etc. And now it runs like crap any help would be great thanks

theflatlander

iTrader: (3)

There's a billion threads on the subject. and if you weren't prepared to have to reset ur idle you after emissions removal u prob shouldn't have bothered with itin the 1st place

nycgps

iTrader: (4)

oh man REALLY? IDLE NO GOOD ?

Search button up there, learn how to use keyword, you will get your answer in no time.

driftxsequence

iTrader: (8)

This is going to happen. My car wont idle on its own when it first starts up, but after about a minute it will hold an idle at about 1000(decent sized street port).

This is how i received my car, so I don't know what it is like to drive a stock car, but I'm assuming all the bucking etc would not be there.

rusty FC

iTrader: (7)

mine also will not idle when cold, when it gets some heat built up in it it will idle around 1,000rpm. she runs great. i think its just something you have to deal with, no big thing to me

TheAbsence

iTrader: (19)

^ Clogged/deleted thermowax?

beefhole

iTrader: (29)

I will never understand why people take the thermowax out...
Some say it helps lower intake temps because you don't have hot water passing through your TB
Ever lift the hood after driving for 10 minutes? Mmmm... barbecue time. Think that TB is staying cold because you took the thermowax out?

blackrotary23

people take the thermowax off to help the rpm's drop faster. dont ask, lol. it works, but it does not serve a very good purpose seeing how if the rpm's drop too fast, the car has the tenancy to stall.

theflatlander

iTrader: (3)

I did the full tb mod, emissions removal and premix for simplicity. Having 3 vacuum lines and a uncluttered engine makes for a good time. As for stalling on decel, can't say it ever happened to me and in pretty sure a 9lb flywheel will drop recent a lot faster than stock.

walken

iTrader: (6)

did you remove the BAC?

theflatlander

iTrader: (3)

Yes and idled solid at 750...when warmed up. Would try and die when motor was cold but that was to be expected.

beefhole

iTrader: (29)

People are not to bright... the DASHPOT slows the throttle plates down as they snap shut/approach the closed position. Most who have done the "mod" have removed the dashpot as well, hence the near stalling.

I enjoy having my car start easy, and drive better. I guess I am not "mad tyte" enough to drive without these aids.