82streetracer

iTrader: (1)

I removed the OMP, and will premix, because my haltech wont run it.

What shoud I do with the oil jets. It looks like there is a brass fitting or something in there.

should I take those out or should I juse put a bolt in there?

thanks.

J-Rat

iTrader: (2)

I think that most people thread a bolt in there.

13bpower

Put bolts in there, and use the little crush washers that go around the oil injectors to make sure it seals up good.

White_FC

Good luck finding bolts the right length aswell, you may very well have to shorten them with a hacksaw before installing.

82streetracer

iTrader: (1)

cool thanks

Fitness Stain

you can search up premix, and there are several writeups....of those right ups several will tell you the exact bolt size and length you need...pretty straightforward

1987RX7guy

iTrader: (3)

https://www.rx7club.com/showthread.p...5&pagenumber=1


The sizes should be in my write-up. I used a dremel to cut them to length and use a dab of permatex RTV ultra black to seal things up.

Hope that link helps you

Santiago