ok i got the new indiglo guages for my 90 vert n/a
I put them in right I think they work fine but when i put everything back together my gas pegs to top when the car is turned on. Then my water temp guage starts of at 1/4 the way up then as the motor heats up it pegs out aswell. and now my volt gauge is at 8 not 16 like before

I connected the black wire to the ground for the guage face hook up(black connector on left) and the red one to a red and silver wire(on the white connector, right side) which got power when i turned the parking light on

So did i hook them up wrong or what and why our my guages not working now i cant figure this crap out please help
JD

 

First off, I don't know anything about Indiglo guages. Can't help you with your question.

As far as helping you get help goes, trying posting with a title that actually describes the problem. You'll have a better chance of drawing the eye of someone who has the answer. "Really confused and pissed" is a lot easier to ignore than, "Indiglo gauges not working properly," or, "Indiglo gauge wiring question."

Try posting your question again in a new thread, with a *helpful* subject line.

 

Well the gauges you put in had nothing to do with the stock needles right? So basically you messed with something else. Prolly disconnected something or something is loose. Hopefully someone else will be able to help, maybe someone that has them.

 

ok yes you are right ride or die dam black wire came apart but i fixed that they are working perfectly i will take some pics so every one can see next time i will try to post more appropriately