quiet 3" muffler
#1
Senior Member
Thread Starter
iTrader: (11)
Join Date: Feb 2008
Location: drifting .pa
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
quiet 3" muffler
What kind of muffler can i get that is as quiet as possibly but still flows like its straight through . Im getting sick of the loud fart can plus wouldnt it be more quiet if it was in th middle of the car and not right at the end??
#5
?
does anyone have this silencer?
im curious on the noise level and preformance vs the original silencer.
this automatically adjusts when it has more pressure (when you floor it)..well read for yourself.
http://www.2kracing.com/Product/103.html
im curious on the noise level and preformance vs the original silencer.
this automatically adjusts when it has more pressure (when you floor it)..well read for yourself.
http://www.2kracing.com/Product/103.html
Trending Topics
#9
does anyone have this silencer?
im curious on the noise level and preformance vs the original silencer.
this automatically adjusts when it has more pressure (when you floor it)..well read for yourself.
http://www.2kracing.com/Product/103.html
im curious on the noise level and preformance vs the original silencer.
this automatically adjusts when it has more pressure (when you floor it)..well read for yourself.
http://www.2kracing.com/Product/103.html
there you go, a whole bunch cheaper.
~TDR
#13
#15
Senior Member
Thread Starter
iTrader: (11)
Join Date: Feb 2008
Location: drifting .pa
Posts: 368
Likes: 0
Received 0 Likes
on
0 Posts
i want too build it as a sleeper but still breath heavy as hell. I have 50 series flowmasters on a bigblock and they dont do much to quiet it down and they are an offset baffle design
#16
Crash Auto?Fix Auto.
iTrader: (3)
Building a quiet yet high flowing exhaust takes many mufflers. Thats the main thing.
For best results, use a resonator or offset muffler in the single section of the exhaust, and run offset dual mufflers at the rear. Its nearly impossible to build even a relatively quiet, high flowing single system. My exhaust on my TII is tame compared to every single setup I've run (some with 4 resonators!!)
You could even get away with a more restrictive muffler when running duals since the actual mufflers "need" to flow is lessened by the fact that theres two in series.
For best results, use a resonator or offset muffler in the single section of the exhaust, and run offset dual mufflers at the rear. Its nearly impossible to build even a relatively quiet, high flowing single system. My exhaust on my TII is tame compared to every single setup I've run (some with 4 resonators!!)
You could even get away with a more restrictive muffler when running duals since the actual mufflers "need" to flow is lessened by the fact that theres two in series.
#18
®
iTrader: (4)
I am running 2 of these
http://store.summitracing.com/partde...5&autoview=sku
and one of these
http://store.summitracing.com/partde...5&autoview=sku
and one of these
http://store.summitracing.com/partde...5&autoview=sku
and it is still too loud for my liking... but some of you might like it
http://store.summitracing.com/partde...5&autoview=sku
and one of these
http://store.summitracing.com/partde...5&autoview=sku
and one of these
http://store.summitracing.com/partde...5&autoview=sku
and it is still too loud for my liking... but some of you might like it
#19
FC since 99
iTrader: (2)
I'll give away my secret...
I've got two Magna-Flows. The mid one is HUGE , the one on the tip is a little smaller.
My Downpipe is 3.5", The middle magnaFlow is 3.5" inlet and 2.5" outlet.
The trick is, exhuast cut-out...
My system is super quiet, but when I need to get on it... open dump!!!
I've got two Magna-Flows. The mid one is HUGE , the one on the tip is a little smaller.
My Downpipe is 3.5", The middle magnaFlow is 3.5" inlet and 2.5" outlet.
The trick is, exhuast cut-out...
My system is super quiet, but when I need to get on it... open dump!!!
#20
Rotary $ > AMG $
iTrader: (7)
I'm running 1 Bonez superflow with presilencer.
2 of these in the stock location after the y-pipe.
http://store.summitracing.com/partde...5&autoview=sku
Sound is mellow and deep down low in the power band; it gets pretty dominant when rpms rise, but never harsh or shrill.
2 of these in the stock location after the y-pipe.
http://store.summitracing.com/partde...5&autoview=sku
Sound is mellow and deep down low in the power band; it gets pretty dominant when rpms rise, but never harsh or shrill.
#21
®
iTrader: (4)
I'll give away my secret...
I've got two Magna-Flows. The mid one is HUGE , the one on the tip is a little smaller.
My Downpipe is 3.5", The middle magnaFlow is 3.5" inlet and 2.5" outlet.
The trick is, exhuast cut-out...
My system is super quiet, but when I need to get on it... open dump!!!
I've got two Magna-Flows. The mid one is HUGE , the one on the tip is a little smaller.
My Downpipe is 3.5", The middle magnaFlow is 3.5" inlet and 2.5" outlet.
The trick is, exhuast cut-out...
My system is super quiet, but when I need to get on it... open dump!!!
which magnaflow are you using in the middle... I want to use #12578, but not sure it will tuck up there nicely
Thread
Thread Starter
Forum
Replies
Last Post
Shainiac
Single Turbo RX-7's
12
07-17-19 02:20 PM