Question for people in the 300+ RWHP club
GrapefruitRacing?
Joined: Apr 2003
Posts: 2,155
Likes: 0
From: PartSource
are you kidding??? i get 115 in second??
edit*dunno what the other gears top out at but i'll let you know later this spring when she hits the road*
edit*dunno what the other gears top out at but i'll let you know later this spring when she hits the road*
Last edited by RXciting; Mar 9, 2004 at 11:44 PM.
Originally posted by Faster Is Faster
I hope with all my heart that you are right because my goal is 330-350rwhp (at the moment) and it would be terrible waste of money(xxxx$) if im not satisfied with my car been fast enough. Going to dyno this month or next. Wish me luck.
I hope with all my heart that you are right because my goal is 330-350rwhp (at the moment) and it would be terrible waste of money(xxxx$) if im not satisfied with my car been fast enough. Going to dyno this month or next. Wish me luck.
I wish I was driving!
Joined: Dec 2001
Posts: 5,241
Likes: 84
From: BC, Canada
Re: Question for people in the 300+ RWHP club
Originally posted by Rxmfn7
Im getting pretty anxious about my FC, I want to get it done so bad
Anyway, I just like to know your guys impressions as far as the speed of it is concerned. My turbo2 before all the upgrades in the works (T04 hybrid, FMIC, streetport, etc..) had a full RB exhaust, TID, etc. It was pretty quick, but nothing Id call real fast. Im sure the 140k miles , low compression and bent turbine fins werent helping though. So is the car with 300rwhp a beast or what? Like if you give someone a ride, are they like "whoa this is pretty quick", or "Holy mother of god slow down!!" ?
Just so you know Im no stranger to fast cars, Im around 500+ HP cars daily. Just have never driven/been in a FC with much power.
Im getting pretty anxious about my FC, I want to get it done so bad
Anyway, I just like to know your guys impressions as far as the speed of it is concerned. My turbo2 before all the upgrades in the works (T04 hybrid, FMIC, streetport, etc..) had a full RB exhaust, TID, etc. It was pretty quick, but nothing Id call real fast. Im sure the 140k miles , low compression and bent turbine fins werent helping though. So is the car with 300rwhp a beast or what? Like if you give someone a ride, are they like "whoa this is pretty quick", or "Holy mother of god slow down!!" ?Just so you know Im no stranger to fast cars, Im around 500+ HP cars daily. Just have never driven/been in a FC with much power.
400 is where I place the limit of streetability and usable power.
500+ is when it becomes "slow down".
Just Looking Around
Joined: Jan 2002
Posts: 1,830
Likes: 0
From: Fort Benning, Ga./ Anna, Tx.
My car dyno'd 309 to the wheels at 8 PSI and I scared the crap out of any girls that went for a ride in my car. Any one of my friends would grab something(armrest, anything) by the time I could fully get into it.
I could downshift going 80 and break the back end loose, thats something I wasn't ready for but got used to...
I just got the motor rebuilt amd in the process of breaking it in. The guy who built it said that with this set up I could get 400 to the wheels easy....
I can't wait!!!!Just gotta be safe and not drive in the rain...
I could downshift going 80 and break the back end loose, thats something I wasn't ready for
but got used to...I just got the motor rebuilt amd in the process of breaking it in. The guy who built it said that with this set up I could get 400 to the wheels easy....
I can't wait!!!!Just gotta be safe and not drive in the rain...
Last edited by kleach18; Mar 10, 2004 at 02:07 AM.
Full Member
Joined: Sep 2003
Posts: 168
Likes: 0
From: Finland
Originally posted by jreynish
You know if you have everything to safely support 330-350 Rwhp, then you have what it takes with a few extra hundred dollars to do 400-450 even 500.. that is the beauty of it!
You know if you have everything to safely support 330-350 Rwhp, then you have what it takes with a few extra hundred dollars to do 400-450 even 500.. that is the beauty of it!
Running 14psi max
PS. a few exrta fuel injectors coming soon..
Thread Starter
Joined: Oct 2001
Posts: 7,529
Likes: 2
From: Lower Burrell, PA
Originally posted by cjbechtel
So guys what is an aproximate cost of all the upgrades needed to reach 300-350 HP? Please anyone, thanks.
So guys what is an aproximate cost of all the upgrades needed to reach 300-350 HP? Please anyone, thanks.
T04 Hybrid Turbo - $550
Greddy FMIC- $1000
Injectors - $300
Rebuild/Streetport- $1400
Full Exhaust - $700 average, unless going custom
Standalone EMS - $1400, including tuning
Clutch- $350
Misc-
(intake, gaskets, etc)- $400
There may be a few things Ive left out, but off the top of my head thats about $6k. You probably dont *need* a standalone, could get away with just a S-AFC , but the standalone is a very good thing to have.
Full Member
Joined: May 2003
Posts: 230
Likes: 0
From: fresno, ca
what is the most power you can get with the stock turbo and stock non ported motor? Thanks. And what would have to be done when it comes time to smog it. I live in california.
Last edited by cjbechtel; Mar 10, 2004 at 10:23 AM.
Meesto Spakaro
Joined: May 2001
Posts: 489
Likes: 0
From: Redondo Beach, CA
300rwhp FC is fast, but let's not forget that most Turbo II's typically weigh in around 3000 lbs without driver.
My buddy's FC is around ~305rwhp, with porting equivalent to an aggressive FD street port
He has
running .95 bar
3mm Apex Seals
exhaust port equivalent of FD race port
large intake ports
80 - 70- 70mm exhaust system
Haltech E6k
FD fuel pump
1000cc secondaries 550cc primaries
various little tricks here and there
T3/T4 hybrid
life doesnt really start until around 3200rpm after 7psi where the turbo really starts spooling
My buddy's FC is around ~305rwhp, with porting equivalent to an aggressive FD street port
He has
running .95 bar
3mm Apex Seals
exhaust port equivalent of FD race port
large intake ports
80 - 70- 70mm exhaust system
Haltech E6k
FD fuel pump
1000cc secondaries 550cc primaries
various little tricks here and there
T3/T4 hybrid
life doesnt really start until around 3200rpm after 7psi where the turbo really starts spooling
Last edited by BlackR1; Mar 10, 2004 at 08:29 PM.
Thread Starter
Joined: Oct 2001
Posts: 7,529
Likes: 2
From: Lower Burrell, PA
Originally posted by BlackR1
300rwhp FC is fast, but let's not forget that most Turbo II's typically weigh in around 3000 lbs without driver.
300rwhp FC is fast, but let's not forget that most Turbo II's typically weigh in around 3000 lbs without driver.
I think you are overestimting alot. A S5 Turbo2 is a little over 2900, while a S4 T2 is a tick over 2800, and that weight usually goes down alot when modified. Stock S4 turbo2 wheels alone are like 24lbs a piece. PLus most people remove accessories like A/C and power steering, and aftermarket exhaust systems take off a considerable amount of weight also. The goal weight for my Turbo will be 2600lbs without driver.
Last edited by Rxmfn7; Mar 10, 2004 at 09:53 PM.
1 BAD 7
Joined: Feb 2003
Posts: 277
Likes: 0
From: Miami,Fla
Originally posted by Rxmfn7
I think you are overestimting alot. A S5 Turbo2 is a little over 2900, while a S4 T2 is a tick over 2800, and that weight usually goes down alot when modified. Stock S4 turbo2 wheels alone are like 24lbs a piece. PLus most people remove accessories like A/C and power steering, and aftermarket exhaust systems take off a considerable amount of weight also. The goal weight for my Turbo will be 2600lbs without driver.
I think you are overestimting alot. A S5 Turbo2 is a little over 2900, while a S4 T2 is a tick over 2800, and that weight usually goes down alot when modified. Stock S4 turbo2 wheels alone are like 24lbs a piece. PLus most people remove accessories like A/C and power steering, and aftermarket exhaust systems take off a considerable amount of weight also. The goal weight for my Turbo will be 2600lbs without driver.
Thread
Thread Starter
Forum
Replies
Last Post
Heedlessone
Group Buy & Product Dev. FD RX-7
288
Sep 16, 2018 07:22 PM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM