question about putting nitrous in N/A 13b
question about putting nitrous in N/A 13b
hey i was thinking about putting a nitrouse system in my N/A 13b but i dont know how the outcome would be. some friend of mine told me that i should do it. kk i have a holley 4 barrel, racing beat intake/exhaust. everything in the engine bay is gone except for the engine and whats on it. so if somebody can tell me that it would be ok to do nitrous and tell me what outcomes i should expect. also wondering if i can get a turbo kit for it and where i could get it. thanks.
IOHM that's asking for trouble. I believe some people have it in their cars but adding a catalyst to an already VERY hot burning engine is not smart. forced induction (turbo, supercharger) sure, NO2 or strait O2 not smart. but do a search and maybe (very likely) I am wrong.
Ryosuke
Ryosuke
there are no complete kits for turboing a 6 port engine
aaroncake has a write up on turboing your n/a
As far as Nitrous is concerned, sure, why not. The motor can handle a 100 shot without trouble...and I wouldn't bother going fully carb'd either, a friend of mine used a zex wet setup running a 75 shot for a few seasons with no issues on the EFI
I would recommend using a wet system though to insure you don't lean that sucker out
aaroncake has a write up on turboing your n/a
As far as Nitrous is concerned, sure, why not. The motor can handle a 100 shot without trouble...and I wouldn't bother going fully carb'd either, a friend of mine used a zex wet setup running a 75 shot for a few seasons with no issues on the EFI
I would recommend using a wet system though to insure you don't lean that sucker out
Originally Posted by classicauto
there are no complete kits for turboing a 6 port engine
Originally Posted by jhammons01
why are you talking about Turbos?
He asked about possibly turbo'n as well. Not just nitrous. Gotta read the whole first post =P
As far as turbo goes. I've done my conversion fairly cheap. Thanks to alot of help on supplied parts.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
turbo-minivan
General Rotary Tech Support
69
Feb 4, 2016 12:29 AM
ncds_fc
New Member RX-7 Technical
1
Aug 15, 2015 10:06 AM
KAL797
Test Area 51
0
Aug 11, 2015 03:47 PM




