Pulling Injectors on '88 NA....Any tips/tricks?
#1
Full Member
Thread Starter
Join Date: Nov 2001
Location: Louisville, KY
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Pulling Injectors on '88 NA....Any tips/tricks?
Going to be pulling the injectors on my '88 NA project car tonight. Are there any tips/tricks I should be aware of before diving into this project?
Anything else I should do while I am in there?!?!
Any help is greatly appreciated.
Mike D
Anything else I should do while I am in there?!?!
Any help is greatly appreciated.
Mike D
#2
I Push My Car Real Fast!
Join Date: Jan 2003
Location: Riverside CA
Posts: 1,072
Likes: 0
Received 0 Likes
on
0 Posts
yea, try not to break the injector clips. they are held in by a metal wire that can be moved asside with a screwdriver. then slide it out you never know when you will need the clips
#3
Full Member
Thread Starter
Join Date: Nov 2001
Location: Louisville, KY
Posts: 115
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 81Rex6port13b
yea, try not to break the injector clips. they are held in by a metal wire that can be moved asside with a screwdriver. then slide it out you never know when you will need the clips
yea, try not to break the injector clips. they are held in by a metal wire that can be moved asside with a screwdriver. then slide it out you never know when you will need the clips
Found a local place that will clean and check all four for ~$30...that seem like a good price to you all??!?!?!
Thread
Thread Starter
Forum
Replies
Last Post
rgordon1979
3rd Generation Specific (1993-2002)
40
03-15-22 12:04 PM