hondahater

iTrader: (2)

Ok I've done search after search but I still can't seem to find anything. I was woundering if anyone else has this boost controller? Well what I wanted to know is two things. First being that their are four wires that go into that thing (green, white) and (red, yellow) are the red and yellow power and ground? Second I was woundering if its true that the hose going from the waistgate to the in and from the out to wherever it goes has to be reall close or can it be relitivly far away like say 3 or 4 feet? Thanks.

hondahater

iTrader: (2)

no one ?

Wanked_FC

iTrader: (1)

I have this controller, closer is better as far as repsonse time goes, but if its got a few feet of hose it won't be too horrible. Green and white should have a plug on them, they go to the boost selenoid. On my controller I have black and red, red is power, and black is ground.

hondahater

iTrader: (2)

thanks man I apprectiate the help!!! So the responce time is a little slow but thats it, it will still work right? Thanks

Wanked_FC

iTrader: (1)

yeah, it'll work, the difference in response time is minimal, you just don't want like 6 feet of vacuum hose running from the selenoid to the wastegate.

Wanked_FC

iTrader: (1)

http://www.clubrx.org/manuals/greddyprofec.htm

link to the manual if you're interested

hondahater

iTrader: (2)

Thanks man I appreciate all your help!

jinx22630

Also, make sure that you have the little black box that the hose goes into situated the right way, don't turn it sideways or anything, just make sure it goes straight up and down.
How's that for a run on sentence

hondahater

iTrader: (2)

Hey my english is just as bad don't worry about it and again thank you very very much for the info I had no idea about that and how it is right now...lets just say its not up and down, lol. I'll drill some more holes today and install it straight up and down. Thanks again man your a life saver.

hondahater

iTrader: (2)

anybody with a profec-b. do you know what settings are supposed to be on the dip switches in the back? Thanks.

Wanked_FC

iTrader: (1)

Actuator type is how mine is set. 1 and 3 on, 2 and 4 off.

hondahater

iTrader: (2)

hum....never seen it like that usually its up down down up or down up down up.....strange. and this works?

Wanked_FC

iTrader: (1)

up down down up is the other setting for actuator when overboost occurs. It works as well.