2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.
Sponsored by:

power window stuck

Thread Tools
 
Search this Thread
 
Old 08-17-02, 06:32 PM
  #1  
Full Member

Thread Starter
 
Join Date: May 2002
Location: Las Vegas
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
power window stuck

my passenger power window is stuck in the down position and i cant get it back up, the passenger swtich is broken, getting a new one shipped, but i cant get it back up with the drivers switch, does the thing have to be a complete circuit to work?
thx
Old 08-17-02, 06:46 PM
  #2  
Need donor car in Fairfax

 
darkwaveboi's Avatar
 
Join Date: Nov 2001
Location: Northern Virginia
Posts: 1,759
Likes: 0
Received 0 Likes on 0 Posts
you mean "power windows suck"
Old 08-17-02, 06:48 PM
  #3  
Need donor car in Fairfax

 
darkwaveboi's Avatar
 
Join Date: Nov 2001
Location: Northern Virginia
Posts: 1,759
Likes: 0
Received 0 Likes on 0 Posts
oh yeah, forgot to add something:

I believe it does need to be a complete circuit to open/close the windows. I took out my motor, and i could only get it to run if both switches were hooked up
sorry man
Old 08-17-02, 07:14 PM
  #4  
W. TX chirpin Monkey

 
fastrotaries's Avatar
 
Join Date: Sep 2001
Location: Mesquite, TX
Posts: 2,684
Likes: 0
Received 0 Likes on 0 Posts
yes it is. take out the switch. take it apart and clean the contacts with sandpaper or scrape that stuff off with an exacto knife. and it should work. I've fixed several switches that way. and they've all lasted.
Old 08-17-02, 10:28 PM
  #5  
Full Member

Thread Starter
 
Join Date: May 2002
Location: Las Vegas
Posts: 64
Likes: 0
Received 0 Likes on 0 Posts
that wont fix the passenger switch, all thats left of it is the plastic switch, it moves up and down, thats it, no metal, just plastic, ok, now to get the replace ment before monsoon season kicks in

thx for the help
Old 08-18-02, 12:05 AM
  #6  
Senior Member

 
rx_7_driver's Avatar
 
Join Date: Apr 2002
Location: New Orleans, Louisiana
Posts: 717
Likes: 0
Received 0 Likes on 0 Posts
jump the motor from the battery and just leave it up till the switch comes in its on;y two wires put it one way the window goes down, put it the other and it will go back up (unless the motor is bad)
Old 08-18-02, 12:42 AM
  #7  
W. TX chirpin Monkey

 
fastrotaries's Avatar
 
Join Date: Sep 2001
Location: Mesquite, TX
Posts: 2,684
Likes: 0
Received 0 Likes on 0 Posts
Hly ****.......i've never seen one that worn out.
Old 08-18-02, 12:45 AM
  #8  
Senior Member

 
TRURX7's Avatar
 
Join Date: Apr 2002
Location: New Orleans
Posts: 314
Likes: 0
Received 0 Likes on 0 Posts
no ****, denso makes some good electromagnetic components




All times are GMT -5. The time now is 07:09 PM.