CALPICO

iTrader: (4)

Hey, i have an 90 TII with a working power steering pump...however, when i make U turns or turn the wheel more than 90 degrees, it usually does not return by itself...or it will return real slowly in which case I usually have to manually turn it back in order to go straight again...I dont think the pump is the issue because it is very easy to turn the wheel when the car is not moving...anyone know what might be causing this? thanks

misterstyx69

iTrader: (142)

by chance do you have an Aftermarket hub on the steering column?

CALPICO

iTrader: (4)

i have an OEM steering wheel and hub.

RXSpeed16

iTrader: (41)

I have the same behavior with a manual rack. I don't see it as a problem, just a characteristic.

AGreen

iTrader: (11)

Worn suspension/steering components, or poor alignment. It has nothing to do with power steering.

mazdaverx713b

iTrader: (91)

sounds like a possible camber issue. check and replace worn suspension components and have the car aligned professionally.

CALPICO

iTrader: (4)

thanks, i will look into those solutions...any suggestions on what main components may need replacements just incase?

AGreen

iTrader: (11)

ball joints
tie rod ends (inner or outer)
steering rack bushings
control arm bushings
anything that moves