Power cut off, no rev and won't start
#1
New to the Club!
Thread Starter
Join Date: Jun 2020
Location: British Columbia
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
Power cut off, no rev and won't start
Hello,
I have a 1988 FC N/A
I was driving on the highway and i lost power from the pedal. I tried to turn it back on but it wont start. I tried push starting but to no avail and the battery is fine. I'm thinking the fuel pump needs replacing but I'm not sure what it is. The fuses were fine and it does crank, but doesn't start. I searched around and haven't found any answers. Any suggestions on what to test and what might be an issue?
sorry for my inexperience, this is my first rotary.
Thanks
I have a 1988 FC N/A
I was driving on the highway and i lost power from the pedal. I tried to turn it back on but it wont start. I tried push starting but to no avail and the battery is fine. I'm thinking the fuel pump needs replacing but I'm not sure what it is. The fuses were fine and it does crank, but doesn't start. I searched around and haven't found any answers. Any suggestions on what to test and what might be an issue?
sorry for my inexperience, this is my first rotary.
Thanks
#2
Rotary Freak
iTrader: (10)
Hello,
I have a 1988 FC N/A
I was driving on the highway and i lost power from the pedal. I tried to turn it back on but it wont start. I tried push starting but to no avail and the battery is fine. I'm thinking the fuel pump needs replacing but I'm not sure what it is. The fuses were fine and it does crank, but doesn't start. I searched around and haven't found any answers. Any suggestions on what to test and what might be an issue?
sorry for my inexperience, this is my first rotary.
Thanks
I have a 1988 FC N/A
I was driving on the highway and i lost power from the pedal. I tried to turn it back on but it wont start. I tried push starting but to no avail and the battery is fine. I'm thinking the fuel pump needs replacing but I'm not sure what it is. The fuses were fine and it does crank, but doesn't start. I searched around and haven't found any answers. Any suggestions on what to test and what might be an issue?
sorry for my inexperience, this is my first rotary.
Thanks
https://www.rx7club.com/2nd-generati...1144778/page2/
Thread
Thread Starter
Forum
Replies
Last Post