Is it possible to get 300+hp
Bnr turbo. I’m running a panspeed hybrid equivalent to a Bnr stage 3. A tiny more but of lag but picks up great on the higher end. Greddy professor b spec 2 electronic boost control. Use an electronic boost control. Much quicker spool and boost won’t taper off on high rpm. Plus the boost controller has a scramble boost function and I can increase my boost with one push of a button.
You need more fuel, so injectors and pump are required. Run the pump on it’s own relay to give the pump proper voltage. Custom 3” intake into the turbo seemed to help boost pickup on high rpm.
Im running power fc and it’s fine for me but if I want more functions, I’m going with a newer haltech.
my cars pretty fun and my buddies love it. It’s not the fastest thing in the world but will keep you smiling all day.
You need more fuel, so injectors and pump are required. Run the pump on it’s own relay to give the pump proper voltage. Custom 3” intake into the turbo seemed to help boost pickup on high rpm.
Im running power fc and it’s fine for me but if I want more functions, I’m going with a newer haltech.
my cars pretty fun and my buddies love it. It’s not the fastest thing in the world but will keep you smiling all day.
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 34
Likes: 0
From: Hollywood fl
UPDATE just getting started.. And yes that's a stock 13b wire harness on a t2 it works for now but looking for a t2 wire harness as I type.. off topic question my o2 sensor is in the down pipe but wires been cut didn't do the wiring myself so what must I do to get my o2 back working or is it fine without it?
Junior Member
Joined: May 2018
Posts: 14
Likes: 1
From: Virginia
UPDATE just getting started.. And yes that's a stock 13b wire harness on a t2 it works for now but looking for a t2 wire harness as I type.. off topic question my o2 sensor is in the down pipe but wires been cut didn't do the wiring myself so what must I do to get my o2 back working or is it fine without it?
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 34
Likes: 0
From: Hollywood fl
locate the cut wires and reconnect to the sensor. O2’s are used by the computer to trim fuel. So short answer is yes unless your tune is on a wide band with non stock computer. I run a wide band with my adaptronic stand alone computer. If you can set your afr’s manually the old O2 isn’t necessary you would however have a wide band installed already.
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 34
Likes: 0
From: Hollywood fl
Question am I able to turn over the car without a intake pipes attached I don't wana drive just start it because I flushed the engine of all the water it had and put coolant in I changed all the corroded hoses to new ones
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 34
Likes: 0
From: Hollywood fl
I don't deal with Mazda Pros anymore they scammed me more then once. I'm by McArthur high school we're pretty close.
Thread Starter
Junior Member
Joined: Jun 2018
Posts: 34
Likes: 0
From: Hollywood fl
damn we could meet up I don't mind been looking for other rx7 owers maybe we can help each other because I've only been in Hollywood for 4 years don't know to much on we're to get things done for my car
Rotary Enthusiast
Joined: Jun 2004
Posts: 950
Likes: 3
From: indiana
Originally Posted by Yukrx7
Question am I able to turn over the car without a intake pipes attached I don't wana drive just start it because I flushed the engine of all the water it had and put coolant in I changed all the corroded hoses to new ones
Last edited by rx7b13; Sep 8, 2018 at 10:38 AM.
Thread
Thread Starter
Forum
Replies
Last Post