2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

plz help!! hot start and idle problem

Thread Tools
 
Search this Thread
 
Old Aug 18, 2006 | 11:14 PM
  #1  
rurouni2071's Avatar
Thread Starter
wanderer
Tenured Member 15 Years
 
Joined: Jun 2005
Posts: 182
Likes: 0
From: 100 Mile House , BC , Canada
plz help!! hot start and idle problem

well I finally got my 7 reinsured , I had a massive idle problem earlier this year that I thought I ended when I resoldered and cleaned up the wiring harness... but after insurung it and ripping around for 30 minutes or so...

the idle became slightly erratic after I stopped and it died.. I tried to restart it and nothing , it cranks and catches for a beat or 2 then dies...

I let it sit for 20 minutes or so and I got it to start.. it idled really erraticly , and I had to feather the pedal to keep it running... when I tried to bring up the rpm's it felt like it was stuttering..

after I got it going it ran fine at higher rpm's .. I limped it home when I let it idle it died again

its been sitting al summer and it'll be a **** off if I dont get to drive it before the snow flies...

Last edited by rurouni2071; Aug 18, 2006 at 11:18 PM.
Reply
Old Aug 18, 2006 | 11:21 PM
  #2  
Street_Knight's Avatar
Let's eat babies
Tenured Member 05 Years
 
Joined: Aug 2006
Posts: 318
Likes: 0
From: Sacramento
that makes me REALLY sad....
have you checked everything?
Reply
Old Aug 18, 2006 | 11:22 PM
  #3  
KeloidJonesJr.'s Avatar
strictly business
Tenured Member 05 Years
iTrader: (8)
 
Joined: May 2005
Posts: 6,187
Likes: 0
From: chamber of farts
Did you check your TPS?
Reply
Old Aug 18, 2006 | 11:39 PM
  #4  
rurouni2071's Avatar
Thread Starter
wanderer
Tenured Member 15 Years
 
Joined: Jun 2005
Posts: 182
Likes: 0
From: 100 Mile House , BC , Canada
I'm just going out to do that now, i'll bring the numbers back in a sec
Reply
Old Aug 19, 2006 | 12:48 AM
  #5  
rurouni2071's Avatar
Thread Starter
wanderer
Tenured Member 15 Years
 
Joined: Jun 2005
Posts: 182
Likes: 0
From: 100 Mile House , BC , Canada
okay it'll hav to wait till morning
Reply
Old Aug 19, 2006 | 01:45 AM
  #6  
rurouni2071's Avatar
Thread Starter
wanderer
Tenured Member 15 Years
 
Joined: Jun 2005
Posts: 182
Likes: 0
From: 100 Mile House , BC , Canada
anything else I should check tomorrow?
Reply
Old Aug 19, 2006 | 10:50 AM
  #7  
rurouni2071's Avatar
Thread Starter
wanderer
Tenured Member 15 Years
 
Joined: Jun 2005
Posts: 182
Likes: 0
From: 100 Mile House , BC , Canada
wow I checked my tps as shown on fc3spro.. it read 1.5K closeed and open went DOWN to .55K ???
Reply
Old Aug 19, 2006 | 03:52 PM
  #8  
rurouni2071's Avatar
Thread Starter
wanderer
Tenured Member 15 Years
 
Joined: Jun 2005
Posts: 182
Likes: 0
From: 100 Mile House , BC , Canada
weird TPS reading

Alright I set the tps at 1.0K ohms closed , but the WOT is still less than 0.7 k
the idle is a bit rougher and has a little play , but only 50rpm +/- it sits about 650 - 700ish

I havent gotten a chance to take it for a rip and see if it still dies warm
I imagine it will though with the reading on the tps

Last edited by rurouni2071; Aug 19, 2006 at 04:11 PM.
Reply
Old Feb 4, 2009 | 09:51 AM
  #9  
erevos's Avatar
Senior Member
Tenured Member: 20 Years
 
Joined: Mar 2002
Posts: 511
Likes: 15
From: Greece,Volos
i have the same problem.Did the tps tuning fixed the problem?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
82streetracer
Haltech Forum
11
Mar 11, 2019 05:34 PM
stickmantijuana
Microtech
30
Apr 23, 2016 06:37 PM
gtcd
1st Generation Specific (1979-1985)
30
Aug 19, 2015 02:44 AM




All times are GMT -5. The time now is 09:35 PM.