2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

plugs???

Thread Tools
 
Search this Thread
 
Old Mar 27, 2011 | 10:03 PM
  #1  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
KY plugs???

ok under my shift boot on my 91 vert there are two plugs i small white/female and one big white/male. now there are also 4 wires that have been cut and taped. is there a plug missing? would these got to the revers lights or to something under the fog light/mirrow switch? will continue to look. . . . thanks
Reply
Old Mar 27, 2011 | 10:11 PM
  #2  
blackrotary23's Avatar
snap crackle brap
Tenured Member 05 Years
 
Joined: Dec 2007
Posts: 536
Likes: 0
From: indianapolis, indiana
what color are the wires? and are they directly under the shift boot or are they under the middle console where the change holder is?
Reply
Old Mar 27, 2011 | 10:21 PM
  #3  
misterstyx69's Avatar
Retired Moderator, RIP
Tenured Member: 20 Years
iTrader: (142)
 
Joined: Sep 2005
Posts: 25,581
Likes: 136
From: Smiths Falls.(near Ottawa!.Mapquest IT!)
fog light.side mirror switch.
maybe security/alarm button.
wire connectors were usually kept on as part of the harness even though some of the components were not actually on the car when produced..(say manual mirrors but has a connector for the Electrical mirrors)
Reply
Old Mar 27, 2011 | 10:44 PM
  #4  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
under the boot=
small plug=black
blue/black
big plug=green/red
black
4 bare wires=black
black/yellow
black/red
green
under the coin tray.
security light (good)
mirror switch (good)
fog light = dark green and a light green
4 pin plug=2 black wires
red/light blue
black/yellow
2 other wires taped off=red/white and a red/black
Reply
Old Mar 28, 2011 | 06:32 AM
  #5  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
bump
Reply
Old Mar 28, 2011 | 12:09 PM
  #6  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
?????????????????????????????????
Reply
Old Mar 28, 2011 | 09:48 PM
  #7  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
anything at all??????
Reply
Old Apr 1, 2011 | 01:04 PM
  #8  
joshprather93's Avatar
Thread Starter
Full Member
iTrader: (1)
 
Joined: Nov 2010
Posts: 66
Likes: 0
From: benton ky
bump
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
wretchedegg
General Rotary Tech Support
1
Nov 19, 2025 03:07 AM
HalifaxFD
Canadian Forum
126
May 9, 2016 07:06 PM
betes
1st Generation Specific (1979-1985)
8
Sep 27, 2015 08:25 AM
ZacMan
Build Threads
4
Sep 19, 2015 09:20 PM
Enzo1944
New Member RX-7 Technical
2
Sep 6, 2015 08:57 AM




All times are GMT -5. The time now is 07:54 AM.