Ploblems
#1
Full Member
Thread Starter
Join Date: Sep 2005
Location: fort myers florida
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
Ploblems
Ok my N/a turbo project is complete. i started it last night but the idle was rough and the car was barelying running. so we called it quits for the nite and to day we got the car to run for about five min and then i shut it off i no longer will it start. i am sure somthing is not right with the timing. the AFC settings are good for the most part and still nothing. almost feels like it is running on one rotor, could it be vac related? anyone that did a na turbo please help. i dont know what to do.
#2
Passing life by
Did you mess with the timing? There should have been no need to touch it.
Running on one rotor would be failed spark, compression or fuel.
It’s prolly flooded
Running on one rotor would be failed spark, compression or fuel.
It’s prolly flooded
#3
Full Member
Thread Starter
Join Date: Sep 2005
Location: fort myers florida
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
could it be the ECU? i switched to a Turbo ecu and it fit right in to the wiring harness it seemed to easy. I have good spark, "new plugs" and fuel
#5
Full Member
Thread Starter
Join Date: Sep 2005
Location: fort myers florida
Posts: 68
Likes: 0
Received 0 Likes
on
0 Posts
ok i jst put my old N/A ecu back in and the car ran great. does that mean the turbo 2 ecu i bought is bad? should i even swap to a turbo 2 ecu i was told it would be better. maybe i missed something i need to do to install the ECU.
Thread
Thread Starter
Forum
Replies
Last Post