Hey guys, I am In the process of reassembling my car back after a major makeover and I am Identifying the flyleads that I am not using. With this being a brand new OEM Harness I do not have the heart to fillet It open and remove what Is not being used.

I came across this harness plug. It comes out of the fues box but I can't seem to remember where It plugs In. 1 red wire with 3 green ones (various stripes on them) Any Ideas as to what this Is? This Is for a s4.

 

is it Cruise Control Connection,Tony?

 

Hey Dave, It neither Cruies Control (13 pins) nor Power Steering. I just checked my box of parts for this.

 

Ain't no cruise control plug. Not enough pins/sockets.

That plug has five sockets. Only four are occupied ........because your car has no ABS. That connector, connects b/t the Front (F) and Rear (R) harnesses. It's part of THEFT PROTECTION.

IF that plug does not have five sockets........it's another thing.

Theft protection is a waste of money. Most RX won't even start when their owners try.

 

Yes, It has 5 sockets with 4 of them being used.

I have everything minus my dashboard Installed as of yet. With that said, I can verify that I have an operating stock theft system.

I'm not sure what you mean HAILERS when you say " That connector, connects b/t the Front (F) and Rear (R) harnesses."

Thanks for the reply.

 

So I guess I'm wrong. Go look in the 88 onlin FSM at the POWER DOOR LOCK protection page. You'll see a connector with a reference designator FR-04 (FRONT TO REAR HARNESS CONNECTOR).

I was wrong about the THEFT. Shoulda been POWER DOOR LOCK.

 

That explains why my Power Door Locks don't work!

I'm on pg 15-147 and 15-148, with 15-147 being the Power Door Lock Circuit Diagram. No mention of FR-04. Temporairly confused.

 

Page 50-102 of the 1988 wiring diagrams.