vosko

iTrader: (4)

pix from today spent about 2 hours and did all this....







hopefully pulling engine this weekend

cymfc3s

i got a big lead on you.



http://www.2751engineering.com/13BRE.jpg

vosko

iTrader: (4)

yeah seth i know your winning so far. but i have a FAR easier job ahead i think sorta

Silver93T

ah good, but where is fd?

Felix Wankel

Everyone pulls their engines the hard way.

vosko

iTrader: (4)

i own a FD ?

kabooski

Vosk were going to have very similar setup's

Let the E.T race beggin when were both done

Here is my Stage 2 plans: (stage 1 was mild port 3"exhaust) everything else stock = 13.5@105
(my engine is broken too but at the shop now)

Full Street Port
850cc Secs
stock Turbo
upgraded ECU
SX FPR
Walbro 255 FP
BOV
POV
----------------- 1/4?
then later after the car is tuned and see what she runs with stage 2

Stage 3:
TO4E Stock Turbo Upgrade
550cc x2
850cc x2
1600c x2
NPR FMIC
SX FPR
walbro FP

vaughnc

YO BASTARD - got the cosmo 13b-tt in there.

vosko

iTrader: (4)

well mods for right now are gonna be street port, fmic, bigger secondaries, already have ecu. i think some other goodies too

kabooski

see very similar hehe

well except you got a S5 engine that has the bigger factory ports

vosko

iTrader: (4)

you better hope i don't go nuts and get a 13B-RE those have GIANT PORTS

turborotarypower

way to go vosko! i knew you could do it. keep on tearing her down and learning it's the best way!

vosko

iTrader: (4)

i need to rent a power washer the entire engine bay is filthy!

Kurgan

Go to autozone and buy some Simple Green foaming cleaner... its in an aerosol type can. Anyhow, don't get it on your engine (simple green is said to etch aluminum), but everything else in there can get a nice thick coat of it... then just use a hose to wash it off... you will be VERY surprised how well this works...

It worked better than the power washer did on mine.... Next time, I'll simple green (the foam stuff) the engine bay, and then power wash it off.

vosko

iTrader: (4)

SWEET. i'll try that once the engine is out! more stuff on my list of crap to do. remove ac, remove abs....

i think i might go CYMFC3S style and run 1600cc secondaries on the stock computer

vosko

iTrader: (4)

i think its time to finally signup for mazda comp too