oh yeah...to keep in mind...the inside pic...the struff u see n the inner part of the front which is directly ahead of you will be gone in the copy....i had to build on something obviously so just keep that in mind when u see the pic

 

by the end of this week God willing ill have a product possibly in fiberglass......what you guys are seeing is nasty fotos of the plus without any primer.....its like seeing a model with no make up...and u like it! ...so cant wait to get these new pics up..so i have the plug done now all i need is a mold so i can start making copies then make another so i can mod it to fit t2s....so thanx for all the support guys...more coming

 

ill be interested in the TII version....i just dont know if id wanna buy that or the regular version.....cause if i do get a FMIC ya know

hrmmm the TII version would probably look better the way you describe it PLUS theres no harm after i swtich to FMIC ...so yea ill be interested in that just keep me updated

i need by the 25th cause rotorfest is the 29th and ill need a few days to get it painted....thanks again

 

looks like the invader style hoods but it looks great and i would want to buy one.

 

what did you use to make that scoop?

 

you siad it would fit a TMIC? doesnt that hood vent hot air out? how will cold air get into the intercooler? sorry if my questions seem ignorant....if it will work with the TMIC i would be interested.
Hassell

 

i have no clue....u have to keep in mind im just getting started on making this for an NA and i havent even made the first copy yet more or less a mold.....so the master will be done today and the mold will be finished in a few and if im not broke then ill make a copy to sell, and if i can get a customer to pay half ahead of time then ill be fine for the first copy.......but i took more pics that do it more justice and im going to post one.....and later on today ill so some photoshop to show you what a TMIC version would look like...and could someone please show me how to post these pics in the thread itself??

 

more pics that do it justice

 

does it have a function? what is it?

 

aight it obviously didnt show

 

nope, didn't show.

yeah, $400 sounds like a good price if its good quality.

how about, wil it fit with a front strut bar?

 

the function is to have an obviously lighter hood......i took this off of a rex at a local junkyard....and when i swapped it with mine i realised how heavy the one was that i bought compared to mine....so i know some peeps have heavy hoods out there....second of all it looks beter i know alot of peeps that wil spend 300 bux on a t2 hood just for something that is still stock......i designed the other part of the scoop to follow the lines of the lines that are near the sides of the hood and the inner pars follow the lines of the headlights...nothing too drastic but it looks nicer if i could just get some newer pics up.....ill try when i get back home.......as for function the air going over the front part generates lower pressure as it goes over the lip and the higher pressure air from inside the hood gets sucked out...i dont know if it makes that much of a difference...mostly for looks tho......and i made the shape out of urethane foam, sanded it down and then laid bondo to shape on top of that..then a layer of glass just to play with.....and an interesting point, which caused me alot of frustration cuz i used the windsheild wiper nozzles as a point to line up with...then i realised that the nozzles arent symetrically places...which screwed me over for a bit....but its alll over with so im going to go back to my apartment in portland and load these newer pics that do it way more justice up.....so until then....peace

 

yeah strutbar is no problem....
actually it will be a lil higher than stock...now i have this interesting t2 thing in mind which i think will look sick come to think about it.....hmm..more ideas coming up......but first priority is to make just one and sell it the design that i have so i can have some funds to proceed...as well to eat......peace

 

aight guys maybe this will work...and will someone PLEASE tell how to post a pic IN the the thread?

 

and another

 

That looks like a fun project.

So how about strength? Did you remove an support beams on the underbelly of it? Did you add any?If so from what material.

I've been itching for something to do. I was thinking of making a front bumber but a hood would be so much easier and it should add to the cooling which is a major need in AZ.

Good work though.

 

that hood looks soooo sweeet!!!!

I can't wait to get mine!!!

 

bigret ill put you on my list andmake you my first God willing...and about making the hood....lemme tell you...the bumper would be easier in retrospect to make...and after my next project making some cheaper non pop ups im going to make a full on bodykit if i can....the hood was a pain and has cost me some money, more than i expected and looking back i could have made it alot easier if i would have just made a copy of my hood and modified the fiberglass......but the underbelley i had to cut the supports out and mess with all that and sanded it all down which was pretty pointless to even get the underside even looking nice and smooth and as for strength im just going to make sure i use enough glass to keep it strong, sure it makes a difference but if someone is that **** about being safe with a few more aluminum beams then get a cadillac so i figured to hell with it, but i might consider putting something on the otherside to keep it stronger but its not my intent right now...but ive gotta get back to work on this thing before i go broke so until later...and guys i got a photoshop pic of maybe something im thinking for a bumper kit so lemme know of this pic since those of you who saw my last thread with the now know that i dont play when i say ima do something...ill post it here in a sec

 

wow man the primer looks amazing...yo if you have AIM or ICQ you can reach me... frestylereaction on both

we cna talk more about what we can make for T2

 

dbl post

 

just read up more....send me a photoshop or the T2 version of post it here..i can host it for you if you want

frestylereaction@yahoo.com

 

Looks incredible man, just when I'm looking for a reverse scoop hood (for more efficient cooling and downforce...man we think alike, although I'm still working on my shroud). Nice price too...but what about the structural parts, and how many layers are you gonna use for the fiberglass? Anyhow, any new info you have please give me a hollar (PM, email, whatever). I'll keep checking here too...can't wait to see it done.

 

hey guys about the structural parts its all gonna go from underneath except for the feet in which it comes in contact with the rest of the car and the area where the hinges bolt up....when i get the copy done from the mold ill take a look at the strength of it and if i feel it needs supports ill throw a few in there from glass but if thats the case then it could drive up the time and cost, and i sure with the hider then the fiber then the mat then the fiber then the mat and maybe another layer of fiber im sure it will be strong enough, but if i need any changes ill make it so but otherwise its just gonna be more work more money more weight....but ive gotta get back outside and finish sanding and covering the lil gaps so i can wax and gel coat my plug so i can make my mold, and by the way im using white gel coat....anymore questions or advice for that sake would be cool.....thanx

 

Dude, look here. After you attatch the pic to the post, it is *already hosted* by the forum. Now all you have to do is get the link from the forum, edit your post, and insert the link between the[img] tags to make it show automatically. To find the link, click on the attatchment, view the pic, and copy the link above the pic. Now edit your post, hit the IMG button, and paste in the link. Now save these changes and the pic will show up.

 

a pic to post here...see if this works