PICS required>>>
#4
once I place my AFM in my intercooler pipe system I will take a pic..but I have no time so that will be a month from now..then I will run a long pipe from the tubo to the front so I get cold air..the AFM in the intercooler piping system should provide me with some benefit..at least it makes sence when you consider it
Trending Topics
#13
Originally Posted by soulja77
any rubbing issues with 18 inch rims?
Travelintrevor: Is your lcd display exposed or is it retractable?
Travelintrevor: Is your lcd display exposed or is it retractable?
#14
Rotary Freak
Thread Starter
Join Date: Nov 2002
Location: toronto
Posts: 1,807
Likes: 0
Received 0 Likes
on
0 Posts
i was thinking about putting an lcd in the glove compartment box. Going to drill on some sliders, so i can manually slide it out and flip it up. I have vert... dont want theives to steal
my display.
Air intake: Does adaqute air flow into the filter? Can i make an adapter myself for a k&n cone setup? Heat shield looks sweet.
Karmaweasel: Is that an ebay strut bar?
my display.
Air intake: Does adaqute air flow into the filter? Can i make an adapter myself for a k&n cone setup? Heat shield looks sweet.
Karmaweasel: Is that an ebay strut bar?
#15
Rotary Freak
Thread Starter
Join Date: Nov 2002
Location: toronto
Posts: 1,807
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by Travelintrevor
18 rims and tv
where did you get those white gauges? i cant find anything for a 90 cluster.
Rims: Planning on gettiing rims similar to the stock 350z ones. Was thinking 18, but may go with 17s
#17
The Cause of Death
my cardomain
go to page 2 if it's not a link there
a few pics of my intake setup
http://www.cardomain.com/memberpage/802115/2
go to page 2 if it's not a link there
a few pics of my intake setup
http://www.cardomain.com/memberpage/802115/2
#18
slide style_AUTO (Iowa)
Join Date: Aug 2004
Location: Fayette, Iowa (Upper Iowa University)
Posts: 980
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by BlaCkPlaGUE
What did you use, sheet metal and a bender? bandsaw for cutting?
Its a good idea and I want to do it
Its a good idea and I want to do it
#19
Yup, still here
iTrader: (1)
My Intake:
Here's the thread with the writeup: (Look half way down page 5 for all the pics and write-up. It's a repost of the first page.)
https://www.rx7club.com/showthread.p...light=cold+air
Here's the thread with the writeup: (Look half way down page 5 for all the pics and write-up. It's a repost of the first page.)
https://www.rx7club.com/showthread.p...light=cold+air
#21
Rotary Freak
Thread Starter
Join Date: Nov 2002
Location: toronto
Posts: 1,807
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by vipers
heres my custom intake..... took about 20 minutes to make........ got a honda civic short ram intake and hacked it in half..... works perfect!!!
whats that metal stuff after the intake?