PICS required>>>
 

Pics of Modified air intake (removal of stock)

Pics of LCD/TFT Screen in the FC

Pics of 18inch rims


thanks a bunch.

heres my intake... took about 10mins to do and 20 bucks...noticable difference (jimmy rigged for now)

http://img.photobucket.com/albums/v6...ictures712.jpg

18 rims and tv

once I place my AFM in my intercooler pipe system I will take a pic..but I have no time so that will be a month from now..then I will run a long pipe from the tubo to the front so I get cold air..the AFM in the intercooler piping system should provide me with some benefit..at least it makes sence when you consider it

18" rims... (sorry car needs to be washed..) :bigthumb:

any rubbing issues with 18 inch rims?

Travelintrevor: Is your lcd display exposed or is it retractable?

nope i havent had a problem at all with the rims rubbing :bigthumb: what kind do u plan on getting?

http://squeakyweasel.net/dieselstation/rx7/07.jpg

Just a K&N cone thrown on the main intake.

My intake.....
https://www.rx7club.com/attachment.p...hmentid=102054
https://www.rx7club.com/attachment.p...hmentid=102055

I like that heat shield you've done there. Thats pretty good, does the top rubber seal with the hood?

It seals somewhat, not a complete seal.....but good enough for making it in about 15 minutes.

What did you use, sheet metal and a bender? bandsaw for cutting?

Its a good idea and I want to do it ;)

it folds down so you cant see it..look at the idiot light cluster now..it folds down so yuo cant see it.....it was a lot of work!

i was thinking about putting an lcd in the glove compartment box. Going to drill on some sliders, so i can manually slide it out and flip it up. I have vert... dont want theives to steal
my display.

Air intake: Does adaqute air flow into the filter? Can i make an adapter myself for a k&n cone setup? Heat shield looks sweet.

Karmaweasel: Is that an ebay strut bar?

where did you get those white gauges? i cant find anything for a 90 cluster.

Rims: Planning on gettiing rims similar to the stock 350z ones. Was thinking 18, but may go with 17s

http://img236.exs.cx/img236/9082/intake23uc.jpg
My 12 dollar e-bay intake and my dirty ass engine.

my cardomain
go to page 2 if it's not a link there

a few pics of my intake setup

http://www.cardomain.com/memberpage/802115/2

I used cardboard as a template to get the proper fitment and bends. Then I traced it onto some extra sheet metal that I had laying around the shop. Cut it out with a bandsaw and then bent it on the edge of the workbench. Then I used some extra vacuum/fuel lines that I had laying around and sealed the edges of the shield.

My Intake:

Here's the thread with the writeup: (Look half way down page 5 for all the pics and write-up. It's a repost of the first page.)

https://www.rx7club.com/showthread.p...light=cold+air

https://img59.photobucket.com/albums...ntakefront.jpg

heres my custom intake..... took about 20 minutes to make........ got a honda civic short ram intake and hacked it in half..... works perfect!!! :bigthumb:

whats that metal stuff after the intake?

??????? are you talking about the quick release clamps??

Those modified gauges are awesome! Where'd you get 'em? Ebay?
:p:

i-SP33D-for-J3SUS

the clean look
 

that didn't work

stop bitchin an clean it!