Car: 1987 RX-7 Turbo II

So I'm in the process of overhauling my engine and I need a new vacuum line....


The one with the red line is the one that im looking for... The mazda dealership can't find the part on their parts fiches to get a # to order.

So can someone help me find the correct part number for the vacuum line that has a red line on it? It leaves a vacuum nipple between the two oil injection ports on the lower intake manifold and ends on the uppermost cast intake manifold piece right before the throttle body begins.

If anyone could help me find the part number for this line I would be very appreciative as mine is hard as glass!

 

Why not buy vaccum line and make a new one ?
I believe the size is 3.5mm

 

^ Yeah vacuum lines are a dime a dozen. Your local autoparts store should have them in the right size.

 

Sorry. Don't want vacuum line. Rather pay the bucks for oem mazda formed lines. Anyone out there help me find the part number?

 

Wanting an OEM one from mazda is like wanting a higher interest credit card when you can get a low interest one. The bends really aren't that tight on that particular hose so a preformed hose isn't really that necessary. Now would be a good change to get silicone hoses and not have to worry about the hoses again.

 

no. just go to the auroparts store and get you one. whats there to complain about?

 

they dont have a formed line for that, they will sell you 1m of bulk hose
9935-10-4999 is the part number.

 

It's formed from the factory there must be a part listing for that preformed hose. Can anyone help me this is actually a challenging question!! Not another OMG my engines flooded how do I fix it??!

 

or it could be formed from just being there for 20 years and heated up so many times.

IT DOESNT MATTER JUST GET A HOSE ALREADY