i was wondering how do you take off the little metal black clips that hold the stock omp lines on to the omp bolts
also i was wondering if any one knows witch hose hooks up to witch oil injector cause the car im rebuilding went through an engine fire so i dont know witch hose goes to witch injector

sorry for bad english

 

************************************************** ************************************************** ************************************************** ******************

OH! You mean those *ear* clamps that hold the oil lines to the fittings. Well, what I do, is get my propane torch out and just burn them off. The lines will melt and burn to nothing and leave the clamp by itself. Just flip the residue plastic off the clamps when they cool down. Easier than cutting/prying/whatever.

They are not reusable clamps though. You COULD make them reusable maybe. I've bought the earclamps from McMaster Carr (see the Archives in this section for part numbers). I've also just used saftey wire and twisted it around the line at the fitting.



.

 

thanks any one know how to take the little black clips off cause i tried pulling with some needle nose but it dosnt want to slide off

 

I added words on HOW TO in my first post above.

https://www.rx7club.com/2nd-gen-archive-72/rebuilding-omp-oil-injection-lines-348068/