oil feed and return lines for T4 turbo
Thread Starter
- Make Haste -
Joined: Apr 2005
Posts: 1,648
Likes: 0
From: Calgary, Alberta
oil feed and return lines for T4 turbo
i'm currently upgrading the turbo on my FC to an HKS T04R and was wondering what you guy's do for oil lines, the guy's at RX7 store sold me a -6 AN line for a feed line, and the fitting's to connect to the turbo, however, what do you guy's have done to connect the feed line to the block as well as the return line?...
any and all help is greatly appreciated!...
any and all help is greatly appreciated!...
6AN is pretty big for an oil feed line. I have a regular Garrett T04R and I use 4AN with a restricter. The oil feed is M10x1.50 I believe. I did those lines 2 years ago so I have to remember. http://www.atpturbo.com/mm5/merchant..._Code=ATP-OIL2
Thread Starter
- Make Haste -
Joined: Apr 2005
Posts: 1,648
Likes: 0
From: Calgary, Alberta
arghx, the 12mm, 1.5 fitting fit's into the block for the oil feed line?, for the return line, it look's like you can just use a flange and adapt it to a fitting directly, what type flange is at the bottom, one designed for a T4?...
BDC Motorsports
Joined: Jun 2002
Posts: 3,667
Likes: 6
From: Grand Prairie, TX
B
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
Jul 1, 2023 04:40 PM
