i drained my old oil, capped it, put a new filter on, then put 6 qts in my car (91 n/a) just like the manual says, but when i turned the car on, the oil level was a little high, and my oil pressure was acting really weird, would this be caused by too much oil, or me using a K&N oil filter? was i supposed to put 6 qts in? any quick way to get rid of oil other than draining it and putting new oil back in?

 

its 4 qt, drain the rest, drain som eoil then plug the bolt back in, check the level keep doing it untill u hit the full mark and not anything above it on a cold engine. and damn it why did u not check the oil level before startign the car!

 

Dude, man. SIX quarts....nah bro it takes six English Pints. Just crack the drain plug and let some of it run out.

 

BTW: an english pint is 20 oz much unlike our little 16ers. for a total of 120oz, or pretty damn close to 4 american quarts. sorry if that confused anyone

 

5 Qts is what it takes

 

Hmmmmm, mine was over full with 5 in it....4 put it nicely between the marks.

 

whoa, i always put 5, seems to fill it up just perfectly, in all of my 7's lol

 

and that is why they have manuals....