2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

Not Building Boost

Thread Tools
 
Search this Thread
 
Old Dec 4, 2006 | 11:57 PM
  #1  
TII_88's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 30
Likes: 0
From: Junction City, Kansas
Not Building Boost

Well I got my rx-7 a little over 3 months ago,the only thing was it didn't wanna build boost but it drove an sounded fine untill the gas peddle is pressed pass 1/4 throttle then the boost gauge go's up to 0 an the car starts to putter an acts as if it wasnt to cut off but it stays running just keep's puttering. And when the gas is pressed below 1/4 throttle you can hear the turbo an it seems like it's building boost but no power an the gauge reads -20? . . .if somebody could help me or might have an idea that would be great thanks! . . .
Wll now when I went to start my car the other day it was pretty cold out but I dunno what or how it would start messin up like it did but anyway. I went to start my car an it started right up like always an ran for about 20 seconds then shut off,so I started it back up an it begain to sputter an sounded really sick so I dunno what it is? . . .I love this car an just want it to rn normal for now I'll get toupgradeing things later! . .could anyone help? . .thanks!
Reply
Old Dec 5, 2006 | 12:39 AM
  #2  
HelloRoto's Avatar
Junior Member
 
Joined: Nov 2006
Posts: 28
Likes: 0
From: Michigan
I am by far from the most qualifed person to be giving advice on rx7's. However the situation you are describing is exactly what my rx7 is doing at the moment. After checking the compression then pulling off the turbo inlet duct and checking the turbine i've come to the conclusion it's the turbo that's making my car run like ***. If the car isn't bulding boost, it's blowing blue smoke out of the exhaust, it doesn't want to stay running when you're trying to gas it, all sounds like what mine is doing and all sounds like the turbo. Fortuante they're reasonable used and they're easy to find. Good luck.
Reply
Old Dec 5, 2006 | 12:40 AM
  #3  
snowball's Avatar
I live in the lounge...
Tenured Member 10 Years
 
Joined: Aug 2004
Posts: 2,000
Likes: 0
From: lathrup, MI
some nice big pressure leak.
Reply
Old Dec 5, 2006 | 06:51 AM
  #4  
arghx's Avatar
rotorhead
Tenured Member: 20 Years
Liked
Loved
Community Favorite
iTrader: (3)
 
Joined: Aug 2004
Posts: 16,205
Likes: 461
From: cold
yeah check for boost leaks
Reply
Old Dec 5, 2006 | 11:30 PM
  #5  
TII_88's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 30
Likes: 0
From: Junction City, Kansas
What do you mean by pressure leak? Leaking fromm where? Turbo or engine? Sorry I'm not too smart lol
Reply
Old Dec 6, 2006 | 12:45 AM
  #6  
trainwreck517's Avatar
Rx-hippie
Tenured Member 15 Years
iTrader: (1)
 
Joined: Sep 2003
Posts: 2,076
Likes: 0
From: Torrance CA
search for "boost leak" because thats what it seems you have.. also check to make sure that the MAP sensor is pluged in properly.. But it just sounds like your boost is leaking out causing the car to run extreamly rich causing it to run like **** and sputter.
Reply
Old Dec 9, 2006 | 12:28 PM
  #7  
TII_88's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 30
Likes: 0
From: Junction City, Kansas
Ok thanks well I don't know where anything would be leaking from? All intercooler pipeing is tight and I have no tools to check for leaks an no way really to get my car anywhere because it's not wanting to start anymore! . .but I'll try an get something to check it out!
Reply
Old Dec 9, 2006 | 12:29 PM
  #8  
TII_88's Avatar
Thread Starter
Junior Member
 
Joined: Dec 2006
Posts: 30
Likes: 0
From: Junction City, Kansas
Ok thanks well I don't know where anything would be leaking from? All intercooler pipeing is tight and I have no tools to check for leaks an no way really to get my car anywhere because it's not wanting to start anymore! . .but I'll try an get something to check it out! Oh and also the Map sensor is plugged in good from what it seem's! . .
Reply
Old Dec 6, 2007 | 11:48 PM
  #9  
Lukav's Avatar
Junior Member
Tenured Member 10 Years
iTrader: (1)
 
Joined: Jan 2006
Posts: 20
Likes: 0
From: sebastian
did you ever resolve this problem? my car is doing the same thing and i had ordered an safc about a week ago so we hooked it up (s5) and when i turn the ignition on the airflow reading spikes to 100%. when you leave the ignition on and press the flapper it jumps down to .4%. i'm gonna try to replace the airflow meter.

any other suggestions are appreciated.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
whinin
Introduce yourself
17
Mar 30, 2019 07:53 PM
doritoloco
Introduce yourself
4
Sep 8, 2015 07:58 PM
AXA
Single Turbo RX-7's
8
Sep 5, 2015 10:06 AM




All times are GMT -5. The time now is 09:29 PM.