No power to both coils, no spark
#1
Newbie
Thread Starter
Join Date: Dec 2019
Location: washington
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
No power to both coils, no spark
Both coil packs are not getting any power, however other systems seem to be working fine. I got both coil packs from different vendors, which makes it seem weird that both packs wouldn’t be working. Given the car was a shell, i put a “new” stock wiring harness in along with ecu. Ignition switch has also been replaced as well as all the fuses. Got new plugs and wires too. I am just at a loss as to what could be causing this problem.
#6
Newbie
Thread Starter
Join Date: Dec 2019
Location: washington
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
Ok so bit of an update. Both coils are in fact getring power, however just 0.4 v gonna open up the loom and trace the wiring to see if i can find anything along there. Ecu is getting power, all fuses are new
Thread
Thread Starter
Forum
Replies
Last Post
Sh00bs
1st Generation Specific (1979-1985)
6
11-29-15 11:37 AM
BuffDaddy915
3rd Generation Specific (1993-2002)
8
06-18-06 08:41 PM