hey guys, so im not getting spark on either plugs, leading or trailing. i have (since the problem started) put a remain dizzy and new ignitors. a new blaster2 Leading coil, and new wiring between the coils and ignitors. still no spark... getting frustrating. any suggestions?

 

Are you getting power at the coils???

 

I believe so, yes. Tested with a volt meter and the circuit seems to be being completed at least at the coils

 

Okay once you confirm that you have power at both coils test for power at the igniter. If no power at the igniter you may have a short in the wire. If you have power at both coil and igniter you may have a bad cap and/or rotor. May also be as simple as a bad ground. Also make sure you have your coils wired correctly... If in doubt post a couple pictures.

 

Pics

 

Disconnect all wires from here and leave only the yellow wire.

Do you still have the original harness to the igniters???

 

roger that. and i do, they're on the original dizzy that came on the '85 engine still on it in a box a few feet away.