No highbeams!
#1
90 rx7 convertable
Thread Starter
Join Date: Oct 2006
Location: Minot ND
Posts: 119
Likes: 0
Received 0 Likes
on
0 Posts
No highbeams!
My highbeams have gone out . My lows and flashers work. when my flashers do come on i think they are only the lows because the highbeam light in the instrument panel doesn't come on. I know that on the first gens the switch has a module that can be changed. I was wondering if the 2nd gen has a similar set up or if I have to buy the whole turn signal and cruise switch?
'90 vert
'90 vert
#2
there is a blue relay in the front ( by the washer bottle ) - this controls you high/low beam
you can run a 12v wire from the battery and put it on various points on this relay - this will tell you if the lights are working OK
if not then you might just need the indicator stalk ( which does full beam ) as this controls the dip/full side of the lights
im having real probs with lights on my 91 vert and have prob spent 20 hrs so far on them
have a read of this - it might make sense then : http://www.mazdarotaryclub.com/forum...ad.php?t=32221
stu
you can run a 12v wire from the battery and put it on various points on this relay - this will tell you if the lights are working OK
if not then you might just need the indicator stalk ( which does full beam ) as this controls the dip/full side of the lights
im having real probs with lights on my 91 vert and have prob spent 20 hrs so far on them
have a read of this - it might make sense then : http://www.mazdarotaryclub.com/forum...ad.php?t=32221
stu
Thread
Thread Starter
Forum
Replies
Last Post
The1Sun
1st Generation Specific (1979-1985)
7
09-18-15 07:13 PM
ALPSTA
3rd Generation Specific (1993-2002)
2
01-14-10 02:52 PM