No Fuel or Spark, checked multiple things
#51
Full Member
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Wilmington, NC
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
So basically where i'm at is it starts and runs. Replaced the relay. It does not show a code other than the ACV which is unhooked as one of the wires at the connector broke.
The problem is it just breaks up a lot when trying to give it gas. Going to check my plugs and the timing and see how it goes.
The problem is it just breaks up a lot when trying to give it gas. Going to check my plugs and the timing and see how it goes.
#53
Full Member
Thread Starter
iTrader: (1)
Join Date: Nov 2007
Location: Wilmington, NC
Posts: 152
Likes: 0
Received 0 Likes
on
0 Posts
I got it running. It was a combination of things in the end. The main relay caused the no fuel and spark. And once that was fixed, it came down to me not thinking and rushing as usual.
I did not set the engine at TDC when I reinstalled the CAS. Therefore the timing was quite a bit off. Just redid the CAS a bit ago and it runs great.
Thanks Satch for your help. And thanks to others as well.
I did not set the engine at TDC when I reinstalled the CAS. Therefore the timing was quite a bit off. Just redid the CAS a bit ago and it runs great.
Thanks Satch for your help. And thanks to others as well.
Thread
Thread Starter
Forum
Replies
Last Post
trickster
2nd Generation Specific (1986-1992)
25
07-01-23 04:40 PM