New TPS install issues...
#1
Newbie
Thread Starter
Join Date: Oct 2002
Location: B.C., Canada
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
New TPS install issues...
Ugh my beloved 90 n/a is giving me a headache again. It was in the Mazda dealership the other day and they said she needed a new TPS, since the old one was outta wack and wouldn't adjust. So i talked em into giving me a good deal on a new one, and decided i would put it in myself (no biggie). Ended up taking the throttle body part way off to get it on there. So i put everything back together, and she starts fine, cold idles normally at 3k, but as soon as i kick the cold idle off, it won't idle normally, just stalls out. I warmed it up a bit and tried adjusting it, but with no luck. 0 V for both of the green pins near the airbox all the way through the range of the screw. the resistance is 3.75Kohms between the middle and right top pins on the connector, and i think it should be about 1. whats going on here? any suggestions.
Thread
Thread Starter
Forum
Replies
Last Post
tiger18
3rd Generation Specific (1993-2002)
9
09-03-15 08:27 PM