New pics for Rotaryturbo
New pics for Rotaryturbo
07-24-02, 11:37 AM
#3
Daily Domestic Killer
Join Date: Mar 2001
Location: San Antonio, Tx, USA
Posts: 2,425
Likes: 0
Received 0 Likes
on
0 Posts
Man that car is soo cleeaaan, I'd have to say I don't own anything that is that clean, can you post a list of mods? is that a third gen uim it looks differnt.......man I would have to change my underware if I so much as sat down in that car........Black is the best color, except when its 100 degs and you have no tint or a/c
07-24-02, 12:15 PM
#6
Wankel Traitor
Thread Starter
Join Date: May 2002
Location: Lawrence, KS
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
He might not respond for awhile, but I can answer a few questions.
He's got the Mazdaspeed wing, with the Bomex body kit and the stock side skirts.
Stock block with a full 60-1 turbo, Haltech, NPR front mount, and a few other goodies.
He is pushing close to 400 at the wheels I believe, and it should be good for low 11's.
He gave me a ride before his new turbo was tuned in with the haltech, and all i gotta say is wow...
Jameson
He's got the Mazdaspeed wing, with the Bomex body kit and the stock side skirts.
Stock block with a full 60-1 turbo, Haltech, NPR front mount, and a few other goodies.
He is pushing close to 400 at the wheels I believe, and it should be good for low 11's.
He gave me a ride before his new turbo was tuned in with the haltech, and all i gotta say is wow...
Jameson
07-24-02, 12:55 PM
#7
Full Member
Join Date: Mar 2002
Location: Bradford Ontario
Posts: 116
Likes: 0
Received 0 Likes
on
0 Posts
Thats an absolutely amaaaazing fc.
Great looks and great performance (by the sounds of it)
The only thing I dont like is the yellow in the interior. All in all it's probably one of the most well rounded fc I have seen.
Great looks and great performance (by the sounds of it)
The only thing I dont like is the yellow in the interior. All in all it's probably one of the most well rounded fc I have seen.
Trending Topics
07-24-02, 01:09 PM
#8
Full Member
Join Date: Mar 2001
Location: Blue Springs, MO
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Supermac 7
He might not respond for awhile, but I can answer a few questions.
He's got the Mazdaspeed wing, with the Bomex body kit and the stock side skirts.
Stock block with a full 60-1 turbo, Haltech, NPR front mount, and a few other goodies.
He is pushing close to 400 at the wheels I believe, and it should be good for low 11's.
He gave me a ride before his new turbo was tuned in with the haltech, and all i gotta say is wow...
Jameson
He might not respond for awhile, but I can answer a few questions.
He's got the Mazdaspeed wing, with the Bomex body kit and the stock side skirts.
Stock block with a full 60-1 turbo, Haltech, NPR front mount, and a few other goodies.
He is pushing close to 400 at the wheels I believe, and it should be good for low 11's.
He gave me a ride before his new turbo was tuned in with the haltech, and all i gotta say is wow...
Jameson
Thanks Jameson and thanks everyone else for the compliments. I have a list of mods that I will post when I get home from work this evening. Jameson was correct on everything. The car is pushing around 400rwhp as it has ran a best of 11.8@120mph with only a 1.85 60 ft. This is on pump gas and 15 psi. Once I finish tuning it for race gas and 18 psi it should run in the low 11's. On the yellow interior note. The seats have been changed since these photos were snapped with nice reclining all black race seats and black 3-inch harnesses. I will hopefully be getting a kickass hood and better sideskirts when I find ones that fit the rest of the car right.
Take Care,
Ben
07-25-02, 12:14 PM
#14
Wankel Traitor
Thread Starter
Join Date: May 2002
Location: Lawrence, KS
Posts: 256
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by rico05
Like I have said before, I love the exterior of the car, but too much yellow for my taste. But w/ a 11 second ET, who the hell cares how it looks?
Like I have said before, I love the exterior of the car, but too much yellow for my taste. But w/ a 11 second ET, who the hell cares how it looks?
.
WOWZERZZZZ! 
07-26-02, 09:22 PM
#24
Full Member
Join Date: Mar 2001
Location: Blue Springs, MO
Posts: 56
Likes: 0
Received 0 Likes
on
0 Posts
Thanks again everyone,
The car is a 1991 and yes I have tried to install one on a tenth ann. and it did not fit very well. The dash cluster is painted with automotive type paint after sanding and primering.
87GTR--I ran Mickey 26x8.5-15 ET Drags on the rear and Falken 205/50-15 radials on front. I will be switching to a 26x10.5-15 ET Street soon to allow me in more race classes. I plan on getting this thing into the tens hopefully on a stock motor. The car usually pulls 1.6-1.65 60 fts. but ran 1.85 60 fts at the track because it was so hot it actually made the tires slimy and they wouldn't stick for ****. Hence the high trap speeds and only 11.8 time. I would like to take a look at your map sometime if you don't mind sending it to me.
Ben
P.S. Yes I did beat the Supra as that run was for 1st place at our last import event.
The car is a 1991 and yes I have tried to install one on a tenth ann. and it did not fit very well. The dash cluster is painted with automotive type paint after sanding and primering.
87GTR--I ran Mickey 26x8.5-15 ET Drags on the rear and Falken 205/50-15 radials on front. I will be switching to a 26x10.5-15 ET Street soon to allow me in more race classes. I plan on getting this thing into the tens hopefully on a stock motor. The car usually pulls 1.6-1.65 60 fts. but ran 1.85 60 fts at the track because it was so hot it actually made the tires slimy and they wouldn't stick for ****. Hence the high trap speeds and only 11.8 time. I would like to take a look at your map sometime if you don't mind sending it to me.
Ben
P.S. Yes I did beat the Supra as that run was for 1st place at our last import event.
Last edited by Rotaryturbo; 07-26-02 at 09:25 PM.
07-26-02, 09:30 PM
#25
Originally posted by Rotaryturbo
Thanks again everyone,
The car is a 1991 and yes I have tried to install one on a tenth ann. and it did not fit very well.
Thanks again everyone,
The car is a 1991 and yes I have tried to install one on a tenth ann. and it did not fit very well.
