2nd Generation Specific (1986-1992) 1986-1992 Discussion including performance modifications and technical support sections.

need your opinions

Thread Tools
 
Search this Thread
 
Old Dec 7, 2007 | 10:35 PM
  #1  
driftingmyFC's Avatar
Thread Starter
Rotary Turbo
Tenured Member: 15 Years
 
Joined: Aug 2007
Posts: 422
Likes: 1
From: A-Town, IL
need your opinions

i was wondering if you guys could tell me the right way to remove the stock s4 steering wheel, i thought it was just the middle nut but i think not. which wheel do you guys think it will look best in the fc interior?
Reply
Old Dec 7, 2007 | 10:59 PM
  #2  
blwn rtr 89''s Avatar
Banned. I got OWNED!!!
iTrader: (5)
 
Joined: May 2007
Posts: 629
Likes: 0
From: Americas High Five
there are 3 or so philips head screws behind the steering wheel, then a small connecter for the horn that you need to disconnect, then a 21mm or 22mm nylon lock nut in the center, and from there you pull it off, its keyed into posisition so it will not be easy to remove, also lock your stelling wheel in place before and mark the angel so you dont end up with a slanted steering wheel when you put it back on.
Reply
Old Dec 8, 2007 | 05:20 AM
  #3  
AGreen's Avatar
Trunk Ornament
Tenured Member: 15 Years
iTrader: (11)
 
Joined: Sep 2006
Posts: 3,054
Likes: 2
From: Goose Creek, SC
go to autozone or some place that rents tools and borrow a steering wheel puller. Makes the job easier than trying to rip it off with a crowbar.
Reply
Old Dec 8, 2007 | 09:56 AM
  #4  
Furb's Avatar
Rotary and Engineering
Tenured Member: 20 Years
iTrader: (2)
 
Joined: May 2005
Posts: 1,172
Likes: 1
From: Netherlands
just go exercise some more and try again

mine didnt come off that easy, but a strong pull did the trick
Reply
Old Dec 8, 2007 | 10:28 AM
  #5  
Evil Aviator's Avatar
Rotorhead
Tenured Member 15 Years
 
Joined: Feb 2001
Posts: 9,136
Likes: 39
From: Charlottesville, Virginia, USA
Originally Posted by driftingmyFC
i was wondering if you guys could tell me the right way to remove the stock s4 steering wheel
Just get a cheapie steering wheel puller kit from your local generic auto parts store, or you can make one yourself if you are handy with metal working. It looks like this:
http://www.toolgopher.com/index.asp?...D&ProdID=37758

Originally Posted by driftingmyFC
which wheel do you guys think it will look best in the fc interior?
I think that any of the black 3-spoke wheels look pretty good... Momo, Sparco, etc.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
Sep 16, 2018 07:16 PM
BLK 93
3rd Generation Specific (1993-2002)
7
Sep 28, 2015 01:45 PM
izzolaw
1st Gen General Discussion
2
Sep 27, 2015 08:33 PM
jeremyferguson4444
1st Generation Specific (1979-1985)
8
Sep 19, 2015 01:27 PM
mulcryant
2nd Generation Specific (1986-1992)
10
Sep 9, 2015 05:24 PM




All times are GMT -5. The time now is 01:12 PM.