need write up for TB mod
#1
Full Member
Thread Starter
Join Date: Mar 2007
Location: bellingham, wa
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
need write up for TB mod
i am rebuilding my 89 n/a gtu with 60k miles on the chassis. i had my motor rebuilt by atkins cuz they were local. i had them streetport my motor, 3mm apex seals, turbo oil pump, and new housings. as well as a new flywheel. dont think its light weight. the person that i had pull my motor did a shitty job and nothing is labeled so im somewhat stuck a little bit. i was wondering what mods i should do. it has apexi cone intake with a custom cold air box. the power steering and a/c have been removed. the inside gutted and apexi single cat back system.
i was also wondering about fuel injectors. i read that the stock injectors would be just fine as long as i got them cleaned. but should i get bigger cc injectors while im at this stage of building the motor.
i am planning on getting a t2 fuel pump. do i need a fuel regulator? i am also planning on getting some better pulleys, and a RB header. i am contemplating true dual exhaust. not sure if i want the attention tho.
is it worth taking the emissions off?
i was also wondering about fuel injectors. i read that the stock injectors would be just fine as long as i got them cleaned. but should i get bigger cc injectors while im at this stage of building the motor.
i am planning on getting a t2 fuel pump. do i need a fuel regulator? i am also planning on getting some better pulleys, and a RB header. i am contemplating true dual exhaust. not sure if i want the attention tho.
is it worth taking the emissions off?
Thread
Thread Starter
Forum
Replies
Last Post
Captain Hook
2nd Generation Specific (1986-1992)
13
10-04-15 06:35 PM
demetlaw
3rd Generation Specific (1993-2002)
6
10-02-15 06:22 PM