need wiring help
#1
Junior Member
Thread Starter
need wiring help
i just bought a 1990 fc convertible with a jdm turbo 2 swap. from what i can tell the previous owner tried to chop up the usdm harness to adapt it to the jdm n374 ecu and Im kind of lost with the wiring
#2
Full Member
iTrader: (1)
I'm not one that's usually pretty good with wiring, but if you need help with wiring, you need to be a bit more specific with what you're asking. I understand you showed the connector and the wiring, but for me there's no context here and its hard to even know where to go or what you are looking for. I'm not trying to be that guy, but from past experience, you need to give more information to get a better response. Good luck. If I can help I'll be glad to.
The following users liked this post:
Akagis_white_comet (11-22-22)
The following users liked this post:
Relisys190 (11-22-22)
#4
Junior Member
Thread Starter
#5
Junior Member
Thread Starter
I'm not one that's usually pretty good with wiring, but if you need help with wiring, you need to be a bit more specific with what you're asking. I understand you showed the connector and the wiring, but for me there's no context here and its hard to even know where to go or what you are looking for. I'm not trying to be that guy, but from past experience, you need to give more information to get a better response. Good luck. If I can help I'll be glad to.
#6
Junior Member
Thread Starter
also with it having elements from both would i be able to finish the previous owners work and use the jdm n374 or would i still need to pick up the n370 ecu
Thread
Thread Starter
Forum
Replies
Last Post
FD runs the hills
3rd Generation Specific (1993-2002)
16
03-25-08 10:22 PM