Need Pics of Wheels off other cars on our RX7
09-20-01, 02:10 AM
#1
Senior Member
Thread Starter
Join Date: Apr 2001
Location: Surrey, B.C. CANADA
Posts: 455
Likes: 0
Received 0 Likes
on
0 Posts
Need Pics of Wheels off other cars on our RX7
I can't afford a set of mags right now, so as a cheaper alternative I was going to get a set of some stockers from the junk yards or buynsell for cheap for my 87 TII. So far I've narrowed it down to 2 choices, either a set from the New Preludes or the 1993-95 Ford Probe GT. The Probe GT wheels are 16x8 with a 40mm offset, so it should fit nicely and it came with 225/50/16 tires. Anyone got any pics of their RX7 with some stockers off some other cars? I need ideas...thanks.
09-20-01, 03:25 AM
#2
Speed from skill
Join Date: Feb 2001
Location: San Diego, CA
Posts: 204
Likes: 0
Received 0 Likes
on
0 Posts
Some other ideas I've seen: '91 300ZX wheels and '96 Eclipse GSX wheels. On the Prelude rims, I use 205/50/16 tires in front and 225/50/16 in the rear. You can't use tires wider than 205 in the front without spacers or it'll rub the dampers. I personally like the Prelude rims because they're directional and follow the lines of the car. 
Last edited by AE Turbo; 09-20-01 at 03:31 AM.
09-20-01, 06:02 AM
#3
Slow and old
Join Date: May 2001
Location: It's a midwest thing.
Posts: 1,158
Likes: 0
Received 0 Likes
on
0 Posts
Hmmm...I have a 95 Probe GT in my garage right now...maybe if I get time on Saturday I'll swap 2 wheels and take some pics...can't promise anything, though, because my schedule has been very hectic.
09-20-01, 10:14 AM
#7
Full Member
Join Date: Mar 2001
Location: las vegas
Posts: 183
Likes: 0
Received 0 Likes
on
0 Posts
for awhile i ran mustang cobra rims 93-? the 17x8 polished ones. the fit perfectly with 225's. Plus i bought them from ford for 400 with new tires. some guy bought a new stang and wanted the cobra r rims instead(17x9.5). but you can buy them new for 122 a piece.
Trending Topics
09-20-01, 09:37 PM
#9
Junior Member
Join Date: Mar 2001
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by Little Donny
Just get the 89+ Turbo rims...
Just get the 89+ Turbo rims...
Did u get them off a guy from BC, Canada by any chance??
i sold a set, and sent them to FL. that was few years ago.....
09-20-01, 10:33 PM
#10
Professional Lurker
Join Date: Feb 2001
Location: Orlando
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by 64MC
Little Donny, where did u get those from?
Did u get them off a guy from BC, Canada by any chance??
i sold a set, and sent them to FL. that was few years ago.....
Little Donny, where did u get those from?
Did u get them off a guy from BC, Canada by any chance??
i sold a set, and sent them to FL. that was few years ago.....
09-21-01, 12:49 PM
#12
Full Member
Join Date: Mar 2001
Location: Los Angeles, CA, USA
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
I used to have Mitsubishi Starion rims on my old GXL - It looked really nice. The rims were all from the front off 2 different starions. The width of the rear, and offset of the rears on a starion are too big. You'd have to get fender flares.
09-21-01, 02:11 PM
#13
Eggs are like fowl cheese
Join Date: Mar 2001
Location: Daniel Island, SC
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need Pics of Wheels off other cars on our RX7
Originally posted by ROSHX7
1993-95 Ford Probe GT. The Probe GT wheels are 16x8 with a 40mm offset, so it should fit nicely and it came with 225/50/16 tires.
1993-95 Ford Probe GT. The Probe GT wheels are 16x8 with a 40mm offset, so it should fit nicely and it came with 225/50/16 tires.
09-22-01, 12:41 PM
#16
Eggs are like fowl cheese
Join Date: Mar 2001
Location: Daniel Island, SC
Posts: 574
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by SpeedRacer
16x8 +40mm will be a DAMN tight fit up front, unless you have coilovers or something...They will probably be rubbing your springs otherwise.
16x8 +40mm will be a DAMN tight fit up front, unless you have coilovers or something...They will probably be rubbing your springs otherwise.
09-22-01, 01:49 PM
#17
Professional Lurker
Join Date: Feb 2001
Location: Orlando
Posts: 722
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by ALTurbo2
Little Donny...
did you have to buy $2000 dollars worth of stuff or did they just let you buy the wheels?
Little Donny...
did you have to buy $2000 dollars worth of stuff or did they just let you buy the wheels?
Totals: (56.00 x 4) + 50.00 + 30.00 (for shipping) = 304.00.
The caps were included but I left them off because it looks better!
