need help with a water pump bolt
#1
Full Member
Thread Starter
Join Date: Feb 2002
Location: Texas (YeeHaw)
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
coolant leak help ASAP
ok so i'm a huge freaking dumbass
now that we got that out of the way, I had bought a turbo II that was partially finished from a guy and I finally had it all put together. But then when I went to fill it up with coolant, it all pretty much burped out after getting it partially filled. Paper towels and several minutes of cursing later, I find that the previous gearhead negleticted to put the a bolt in the water pump into a hole facing the intercooler, close to the coolant bypress line, which goes up into the BAC. So now I've got a partially filled turbo II with a missing bolt in the water pump. If anyone can give me some specs or pictures of the bolt I'm missing that would be great. I think I've tried to see if I could use the top bleed bolt from my radiator but that won't fit.
now that we got that out of the way, I had bought a turbo II that was partially finished from a guy and I finally had it all put together. But then when I went to fill it up with coolant, it all pretty much burped out after getting it partially filled. Paper towels and several minutes of cursing later, I find that the previous gearhead negleticted to put the a bolt in the water pump into a hole facing the intercooler, close to the coolant bypress line, which goes up into the BAC. So now I've got a partially filled turbo II with a missing bolt in the water pump. If anyone can give me some specs or pictures of the bolt I'm missing that would be great. I think I've tried to see if I could use the top bleed bolt from my radiator but that won't fit.
Last edited by taco-salad; 11-02-03 at 05:46 PM.
Thread
Thread Starter
Forum
Replies
Last Post
sherff
Adaptronic Engine Mgmt - AUS
9
02-24-19 12:09 PM
rotor_veux
2nd Generation Specific (1986-1992)
7
08-31-15 07:49 PM