ok I have a 86 na, i dont know where this pipe goes but its on the LIM and it curves and then goes up. I dont know where this goes??? Also the little thingy on the UIM right before the LIM is missing a hose as well if anyone has pics of the passenger side engine bay that would be great. Also wtf is the little bottle thing on the passenger side of engine bay near fireway. This is all closer to firewall. Any help would be great thanks.

 

Pics of wtf your talking about.

 

sorry i dont have any pics but if anyone posts some up i could show you what im talking about.

 

any help plse

 

The little bottle thingy is probably your sub-zero starting fluid tank. You don't need it....

Are you talking about the metal line that attaches at the back of the LIM? That goes to your brake booster (attaches to a hose then metal lines that run across the firewall)

The "little thingy" on your LIM might be your vac source nipple for your boost/pressure sensor, on the right strut tower...Should be a fairly long vac line from the boost sensor that goes there...

That help any?

 

it's either the sub zero starting tank or it hooks up to your brake booster...

 

ok the bottle on the far passenger side right up against the firewall is like a bottle looking thing that is the sub zero starting fluid tank?. Ok so what about this steel line going out of my lower intake manifold right next to the firewall? Also i have a tube coming out of brake booster thats just hanging there where the crap does that go lol. again thanks for help guys anyone have pics?

 

anybody i just need some pics. Also i believe that the brake booster line that goes down the firewall goes into the metal pipe on the LIM correct? If so that would be awesome thanks again everyone,kevin.

 

bump plse