need help about a street port
#1
Junior Member
Thread Starter
Join Date: Oct 2006
Location: texas
Posts: 14
Likes: 0
Received 0 Likes
on
0 Posts
need help about a street port
ok you guys ive been really curious to know what a streep port is because ive been hearing about them and i just need to know what they are and the facts of what they do
#4
Shooting for 500
iTrader: (3)
Chodester,
Aaron's link will be a good resource. You also might read the "tech section" of reted's site: www.fc3spro.com. It outlines basic staged upgrades to the rx7, and what kind of supporting mods you would need for a street port to run safely.
Here is the link to the article with the staged upgrades:
http://fc3spro.com/TECH/FM2W/power.htm
Aaron's link will be a good resource. You also might read the "tech section" of reted's site: www.fc3spro.com. It outlines basic staged upgrades to the rx7, and what kind of supporting mods you would need for a street port to run safely.
Here is the link to the article with the staged upgrades:
http://fc3spro.com/TECH/FM2W/power.htm
#5
Lives on the Forum
iTrader: (7)
Is your car turbo or non-turbo? If its non-turbo, you can get about 200 max, and that is with a good port job, a standalone, and a good tune. You are realistically looking at more like 170-180 to the wheels. If its a turbo car, then the sky's the limit. J-rat just put down 490 on race gas, and that was with the turbo running out of breath. Again, that was with a standalone, alchy injection, and a very good tune.
Thread
Thread Starter
Forum
Replies
Last Post
HalifaxFD
Canadian Forum
126
05-09-16 07:06 PM