need fcd install instructions!
#1
I AM A THIEF - READ GOOD/BADGUY SECTION!
Thread Starter
Join Date: May 2002
Location: massachusetts
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
need fcd install instructions!
alright i got an hks FCD and i have no clue where it goes. i need specific instructions! i also got the f-con. alright this is the shiznit. can the fcd be connected to the stock boost sensor and still have it work with the f-con installed.
#2
Rotary Freak
Join Date: Aug 2001
Location: Ottawa, Ontario
Posts: 2,788
Likes: 0
Received 0 Likes
on
0 Posts
take the connector off the boost sensor. Plug the boost sensor into fcd... plug other end of fcd into plug. DONE.
If you're asking questions like these, may I suggest you do some research, or leave it to professionals when installing. An FCON comes with a boost sensor, and there is no need for an FCD.
if your fcd is series 5, however, i will buy it
If you're asking questions like these, may I suggest you do some research, or leave it to professionals when installing. An FCON comes with a boost sensor, and there is no need for an FCD.
if your fcd is series 5, however, i will buy it
#3
A fcon actually also comes with its own fcd. Most are missing the pressure sensor or fcd, or both. Dont run it with out all the components. I believe the pressure sensor is about 250$ from HKS, and the fcd is 90$ if you ever have to replace one of them.
#7
I AM A THIEF - READ GOOD/BADGUY SECTION!
Thread Starter
Join Date: May 2002
Location: massachusetts
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
alright f the pic. so ur sayin that with the f-con box u dont need the fcd right? so all i gotta do is install the f-con box not including the fcd and ill be fine? i know im being a pain in the *** but this thing is driving me crazy!
Trending Topics
#9
Rotary Freak
Join Date: Aug 2001
Location: Ottawa, Ontario
Posts: 2,788
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RYLMONKEY
fingers know ur shiznit. my FCD does not come with connectors.
fingers know ur shiznit. my FCD does not come with connectors.
Enjoy your blown motor and/or fried electronics.
#10
Rotary Freak
Join Date: Aug 2001
Location: Ottawa, Ontario
Posts: 2,788
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by RYLMONKEY
alright f the pic. so ur sayin that with the f-con box u dont need the fcd right? so all i gotta do is install the f-con box not including the fcd and ill be fine? i know im being a pain in the *** but this thing is driving me crazy!
alright f the pic. so ur sayin that with the f-con box u dont need the fcd right? so all i gotta do is install the f-con box not including the fcd and ill be fine? i know im being a pain in the *** but this thing is driving me crazy!
#12
I AM A THIEF - READ GOOD/BADGUY SECTION!
Thread Starter
Join Date: May 2002
Location: massachusetts
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
ok my f-con did come with a SEPERATE FCD. but it does not have connectors. just wires coming out of it. im pretty sure that ull have to solder it to the f-con harness.
#13
I AM A THIEF - READ GOOD/BADGUY SECTION!
Thread Starter
Join Date: May 2002
Location: massachusetts
Posts: 225
Likes: 0
Received 0 Likes
on
0 Posts
oh i see drox so i have to wire the FCD to the stock ecu harness right? thats what i was wondering because i was thinking that if the f-con came with its own pressure sensor then the stock sensor would no longer function! cuz i thought if the FCD was installed on the stock ecu harness then it would only work on the stock sensor. now everything seems to be coming together. if im doin anything wrong plz post! lol thanks for the help!
Thread
Thread Starter
Forum
Replies
Last Post
Jeff20B
1st Generation Specific (1979-1985)
73
09-16-18 07:16 PM
[For Sale] Scratch & Dent, Used, and Open-Box Sale!
SakeBomb Garage
Vendor Classifieds
5
08-09-18 05:54 PM
rx8volks
Canadian Forum
0
09-01-15 11:02 PM