hondahater

iTrader: (2)

just found these two connectors disconnected. ANyone know what they are for??? They are connected at the back of the engine next to the fire wall. THanks.

DerangedHermit

They look pretty connected to me. Do you mean the wires aren't connected?

hondahater

iTrader: (2)

no I connected them because they deffinatley go together just didn't know what it was for.

DerangedHermit

Oh, I see. Wayne, Icemark, or Hailers will probably know.

WAYNE88N/A

Several choices...Sub zero system, wiper motor, cruise control, ABS...All that stuff is in that area. Please don't make me go get the schematics & track down wire colors- I just got up, lol...But, if you pester me enough, maybe later

DerangedHermit

Toldya .

lnbrown5981

probably the cold start. iirc the winshield wiper motor has a black connector. but i think the only plug that is on the part of the engine bay is the cold start. then there's the cruise contol plug, but that's right behing the pass side strut tower. i will have to go look at my car to verify this.

hondahater

iTrader: (2)

ahhh thanks guys! I'll disconnect it again then lol, I guess I won't badger you that much wayne I'm sure I'll have another question soon that will require more badering

HAILERS

IF the plug going down the back of the throttle body has black/white wire and a light green/black wire....then it goes to the ASV or air supply valve. Meant for power steering on a series four.

hondahater

iTrader: (2)

no it only has the blue/white and black/white wires on it

WAYNE88N/A

Sub zero motor will have black/red wiring
Wiper motor will have blue, blue/yellow, blue/white, and blue/red

anything other than that, I have not a clue

HAILERS

Follow the wires behind the throttle body. Do they terminate at a solenoid on the back of the throttle body?